VMIVME-1111机器人模块
暗操作
EFR9SCBG V DC±0%红外0.0…0 m0.0……ftNMOSFET EFGRCAG……V DC暗操作EFGSCBG推荐标准针DC微型M快速断开线组。889DFAC推荐的标准针DC微微M8快速断开线组。889PFAB推荐的标准针AC微型M快速断开线组。889DFAEA§连接选项：对于DC型号，F后缀描述了0 mmin.长电缆上的针DC microM快速断开连接器，而对于AC型号，G后缀描述的是0 mmin长电缆中的针AC microM快速断断连接器。对于其他连接选项，对于没有快速断开连接的m电缆例如EFPMPBA，将F或G后缀替换为：AY表示针DC微微M8快速断开连接例如，EFPMPBY。此选项仅适用于DC非激光型号。PMOSFET模型具有比NMOSFET更低的短路保护浪涌电流阈值。因此，由于感应噪声，它们可能容易受到误触发或短路保护。
玻璃纤维光缆类别
对于高噪声交流应用，我们建议使用NMOSFET型号。玻璃纤维光缆类别。否。说明用户界面颜色状态状态标签黄色OFF输出断电输出断电ON输出通电输出通电闪烁SCP激活NA橙色OFF裕度<正常操作ON裕度>。示教模式激活闪烁输出SCP激活仅限AC型号示教模式启用或输出SCP激活绿色OFF传感器未通电，SCP激活，输出激活传感器未通电传感器通电闪烁NA不稳定裕度条件或输出SCP激活注意：对于DC型号，当SCP激活时，输出和裕度LED交替闪烁。接线图‡‡对于AllenBradley可编程控制器兼容接口，请参阅出版物–.0。
Dark operation
EFR9SCBG V DC ± 0% infrared 0.0... 0 m0.0...... FtNMOSFET EFGRCAG...... V DC dark operation EFGSCBG recommended standard pin DC micro M quick disconnect group. 889DFAC recommended DC pico M8 quick disconnect wire group. 889PFAB recommended standard needle AC mini M quick disconnect group. 889DFAEA § Connection options: For DC models, the F suffix describes 0 mm The pin DC microM quick disconnect connector on the long cable, while for the AC model, the G suffix describes the pin AC microM quick disconnect connector in the 0 mm long cable. For other connection options, for m cables without quick disconnection, such as EFPMPBA, replace the F or G suffix with: AY means DC pico M8 quick disconnection, such as EFPMPBY. This option is only available for DC non laser models. PMOSFET model has lower short-circuit protection surge current threshold than NMOSFET. Therefore, they may be vulnerable to false triggering or short circuit protection due to induced noise.
Category of glass fiber optical cable
For high noise AC applications, we recommend the NMOSFET model. Category of glass fiber optical cable. No. Description User interface color status status label Yellow OFF output power-off output power-off ON output power-off output power-off flashing SCP activation NA orange OFF margin<normal operation ON margin>. Teaching mode activation Flashing output SCP activation is only available for AC models Teaching mode activation or output SCP activation Green OFF sensor is not powered on, SCP is active, output activation sensor is not powered on Flashing NA instability margin condition or output SCP activation Note: for DC models, when SCP is activated, output and margin LEDs flash alternately. Wiring diagram ‡‡ For Allen Bradley PLC compatible interfaces, refer to publication –. 0.
