VT-VSPD-1-23/V0/0-0-1 DCS工控模块备件
此烘焙操作将重置上述湿度敏感度部分中定义的曝光时间。温度最大相对湿度保留所有权利。本文件中的信息如有更改，恕不另行通知。Cree®和XLamp®是注册，Cree徽标是Cree，Inc.的。UL®和UR徽标是UL LLC的注册。8 XLamp™MX-3S LED存储条件XLamp MX-3S LED从原始MBP上拆下但未焊接，应按以下方式之一存储：•将零件存储在带紧盖的刚性金属容器中。验证储存温度是否低于30°C，并在容器中放置新鲜干燥剂和RH指示器，以验证RH是否不超过60%。•将零件存放在干燥、氮气吹扫的柜或容器中，该柜或容器应积极保持温度低于30°，相对湿度不超过60%。•仅适用于短期商店：LED可以在打开后很快重新安装在原始MBP中。可能需要新鲜干燥剂。
使用随附的湿度指示卡
验证相对湿度是否低于60%。如果相对湿度低于60%的环境不适合储存，则应在回流焊前烘烤XLamp MX-3S LED（如上所述）。RoHS合规性根据2013年1月2日实施的欧盟指令2011/65/EC（RoHS2），本产品中RoHS限制物质的水平低于此类物质允许的最大浓度值（也称为阈值），或用于豁免应用。本产品的RoHS声明可从您的Cree代表处或Cree网站的产品生态部分获得。REACh合规性REACh高度关注物质（SVHC）信息可用于本产品。由于欧洲化学品管理局（ECHA）已发布通知，表示打算在可预见的将来频繁修改SVHC清单，请联系Cree代表，以确保您获得最新的REACh SVHC声明。REACh禁止物质信息（REACh第67条）也可应要求提供。UL®认证组件本产品符合UL认证组件的要求，并考虑了4级外壳。根据ANSI/UL 8750，LED封装或其一部分已被调查为火灾和电气外壳。视觉咨询声明警告：不要在操作
This baking operation resets the exposure time defined in the humidity sensitivity section above. Temperature Maximum relative humidity All rights reserved. The information in this document is subject to change without notice. Cree ® And XLamp ® Yes, the Cree logo is Cree, Inc of UL ® And the UR logo are registered by UL LLC. 8 XLamp ™ MX-3S LED Storage Conditions XLamp MX-3S LED is removed from the original MBP but not welded, and should be stored in one of the following ways: • Store the parts in a rigid metal container with a tight lid. Verify that the storage temperature is below 30 ° C, and place fresh desiccant and RH indicator in the container to verify that RH does not exceed 60%. • Store the parts in a dry cabinet or container purged with nitrogen. The cabinet or container shall actively keep the temperature below 30 ° and the relative humidity not more than 60%. • For short term stores only: LED can be reinstalled in the original MBP shortly after being turned on. Fresh desiccant may be required.
Use the included humidity indicator card
Verify that the relative humidity is less than 60%. If the environment with relative humidity below 60% is not suitable for storage, bake the XLamp MX-3S LED (as described above) before reflow soldering. RoHS compliance According to the European Union Directive 2011/65/EC (RoHS2) implemented on January 2, 2013, the level of RoHS restricted substances in this product is lower than the maximum concentration value (also known as threshold) allowed for such substances, or used for exempt applications. The RoHS statement of this product can be obtained from your Cree representative office or the product ecology section of Cree website. REACh Compliance The REACh Highly Concerned Substances (SVHC) information can be used for this product. As the European Chemical Agency (ECHA) has issued a notice that it intends to frequently modify the SVHC list in the foreseeable future, please contact the Cree representative to ensure that you get the latest REACh SVHC statement. Information on REACh prohibited substances (REACh Article 67) may also be provided upon request. UL ® Certified Components This product meets the requirements for UL certified components and considers a Class 4 enclosure. The LED package or part thereof has been investigated as a fire and electrical enclosure in accordance with ANSI/UL 8750. Visual advisory statement Warning: Do not observe exposed lights during operation.中观察暴露的灯。
