XVC724BE 3BHE009017R0102控制器模块
所有检测器
本地温度传感器一起馈入多路复用器。该多路复用器允许位片上灵活地测量任何通道的当前输出功率电平或芯片本身的温度。要根据输出代码计算以摄氏度为单位的近似温度，请使用以下公式：=（.×_）–，其中_是寄存器中的输出字。输入多路复用器可使用_位（寄存器，位）对多路复用器位置进行编程。多路复用器有五个有效状态，从到。图显示了多路复用器映射。至温度传感器通道探测器通道探测器通道探测器通道探测器-图.输入多路复用器映射数据表版本|，共有一个片上位和一个可变时钟输入，每个都有自己的启用控制位。要从进行测量，用户必须首先写入_寄存器，寄存器。
此寄存器包含以下位：
•位_（只读）。此位是完成转换时的标志。•位至位：_（读写）。根据图，这些位用于选择输入。•位_（读写）。该位设置为开始转换周期。•位_（读写）。该位启用时钟。•位_（读写）。该位启用。•位__（读写）。该位设置时钟频率。低电平将时钟设置为，而高电平将时钟设为。_寄存器写入后，必须轮询它以等待_位变高。发生这种情况时，可以从_寄存器寄存器中读取测量值。数据表版|，共应用信息控制设计用于作为更大阵列的一部分。内置状态机有助于简化对多个并行芯片的控制，并确保实现最快的切换速度。然而，仅使用端口就可以操作的各个方面。
All detectors
The local temperature sensors are fed into the multiplexer together. The multiplexer allows the current output power level of any channel or the temperature of the chip itself to be flexibly measured on the bit chip. To calculate the approximate temperature in degrees Celsius from the output code, use the following formula:=( ×_）–， Including_ Is the output word in the register. The input multiplexer can be used_ Bit (register, bit) to program the multiplexer position. The multiplexer has five valid states, from to. Figure shows the multiplexer map. To the temperature sensor channel detector channel detector channel detector channel detector - Fig. Input multiplexer mapping data table version |, there is a upper chip and a variable clock input, each with its own enabling control bit. To measure from, the user must first write_ Register, register.
This register contains the following bits:
• Bit_ (Read only). This bit is the flag when the conversion is completed. • Bit to bit:_ (read and write). These bits are used to select inputs according to the figure. • Bit_ (read and write). This bit is set to start the conversion cycle. • Bit_ (read and write). This bit enables the clock. • Bit_ (read and write). This bit is enabled. • Bit__ (read and write). This bit sets the clock frequency. The low level sets the clock to and the high level sets the clock to_ After a register is written, it must be polled to wait_ The position becomes high. When this happens, you can_ Read the measured value in the register register. Datasheet version |, which applies information control and is designed to be part of a larger array. The built-in state machine helps simplify the control of multiple parallel chips and ensures the fastest switching speed. However, all aspects that can be manipulated using ports alone.
