您的浏览器版本过低,为保证更佳的浏览体验,请点击更新高版本浏览器

以后再说X

欢迎访问瑞昌明盛自动化设备有限公司网站!

图片名

全国订购热线:
+86 15270269218E-mail:stodcdcs@gmail.com

ABB >>

A-B>>

GE>>

BENTLY>>

励磁系统控制卡 IS200ERDDH1A

励磁系统控制卡 IS200ERDDH1A

励磁系统控制卡 IS200ERDDH1A适配器固件版本1.启动DriveExplorer并使用连接到适配器的驱动器联机(仅使用DriveExplorer Full或1203-USB或1203-SSS转换器通过EtherNet/IP)。2.在DriveExplorer树视图中,单击20-COMM-E EtherNet/IP适配器,单击信息图标以显示适配器的属性屏幕。4.“版本:”字段显示适配器固件的...

  • 功能特性
  • 参数规格
  • 视频
  • 应用案例
  • 下载

励磁系统控制卡 IS200ERDDH1A

    励磁系统控制卡 IS200ERDDH1A

    适配器固件版本

    1.启动DriveExplorer并使用连接到适配器的驱动器联机(仅使用DriveExplorer Full或1203-USB或1203-SSS转换器通过EtherNet/IP)。2.在DriveExplorer树视图中,单击20-COMM-E EtherNet/IP适配器,单击信息图标以显示适配器的属性屏幕。4.“版本:”字段显示适配器固件的当前版本(例如4.002)。图1-DriveExplorer窗口提示中的信息图标单击使用5.01或更高版本DriveExplorer Lite/Full的20-COMM-E适配器时,适配器固件版本也显示在DriveExplorer窗格的右侧窗格中。步骤2步骤3步骤4自动化出版物20COME-RN003A-EN-P-2012年5月4 20-COMM-E EtherNet/IP适配器固件版本4.002使用DriveExecutive 1。启动DriveExicutive并使用连接到适配器的驱动器联机(通过EtherNet/IP或1203-USB或1203-SSS转换器)。2.在DriveExecutive树状视图中,单击20-COMM-E适配器

    单击信息图标

    显示适配器的属性屏幕。.“版本:”字段显示适配器固件的当前版本固件中的信息图标闪烁本节描述了闪存升级适配器固件的步骤。Allen Bradley网站更新提供了驱动器和通信适配器的闪存套件,网址为http://www.ab.com/support/abdrives/webupdate.可以通过EtherNet/IP或1203-USB或1203-SSS转换器使用驱动器软件工具执行闪存。有关如何连接到硬盘的信息,请参阅1203-USB或1203-SSS用户手册。可在文献库网站上查看/下载,网址为存在永久性设备损坏的风险。启动闪存更新后,在下载完成且适配器MOD状态指示灯开始闪烁绿色之前,请勿断开驱动器(或20-XCOMM-DC-BASE外部通信套件,如果使用)的电源。

    Adapter Firmware Version

    1. Start DriveExplorer and use the drive connected to the adapter to go online (only use DriveExplorer Full or 1203-USB or 1203-SSS converter through EtherNet/IP). 2. In the DriveExplorer tree view, click the 20-COMM-E EtherNet/IP adapter, and click the information icon to display the adapter's properties screen. 4. The "Version:" field displays the current version of the adapter firmware (for example, 4.002). Figure 1 - When you click the information icon in the DriveExplorer window prompt to use the 20-COMM-E adapter with DriveExplorer Live/Full version 5.01 or later, the adapter firmware version is also displayed in the right pane of the DriveExplorer pane. Step 2 Step 3 Step 4 Automation publication 20COME-RN003A-EN-P-2012 May 4 20-COMM-E EtherNet/IP adapter firmware version 4.002 Use DriveExecutive 1. Start DriveExecutive and go online using the drive connected to the adapter (via EtherNet/IP or 1203-USB or 1203-SSS converters). 2. In the DriveExecutive tree view, click 20-COMM-E adapter

    Click the information icon

    The Properties screen for the adapter is displayed The "Version:" field displays the information icon flashing in the current version firmware of the adapter firmware This section describes the steps to flash upgrade the adapter firmware. The Allen Bradley website update provides flash kits for drives and communication adapters at http://www.ab.com/support/abdrives/webupdate. Flash memory can be performed using the drive software tool via EtherNet/IP or 1203-USB or 1203-SSS converters. For information on how to connect to the hard disk drive, refer to the 1203-USB or 1203-SSS User Manual. It can be viewed/downloaded on the website of the literature library, where there is a risk of permanent equipment damage. After starting the flash update, do not disconnect the power supply of the drive (or 20-XCOMM-DC-BASE external communication kit, if used) until the download is complete and the adapter MOD status indicator starts flashing green.

    21.jpg

    20.jpg

    微信图片_20211117105440.png

    f5a1d52084176089c442c690694264a9.jpg



    品牌:ABB

    型号: IS200ERDDH1A

    产地:瑞士

    质保:365天

    成色:全新/二手

    发货方式:快递发货


图片名 客服

在线客服 客服一号