模块备件IS200IGPAG2AED
重要信息：
此更新可能会导致适配器参数恢复为默认值。升级前，您可能需要使用DriveExplorer或HIM CopyCat功能保存配置。4.要启动闪存更新，请单击闪存更新…按钮。然后从可用更新列表中选择“4.001.xx完整”，然后单击下一步>。按照其余屏幕提示操作，直到闪存更新过程完成并显示新固件版本（v4.001）。使用DriveExecutive 1。安装了闪存套件（请参阅第5页的安装闪存套件）后，启动DriveEx，并使用连接到适配器的驱动器联机（通过EtherNet/IP或1203-USB或1203-SSS转换器）。2.在DriveExecutive树视图中，单击20-COMM-E适配器。然后单击信息图标，如图2所示，以显示适配器的Properties屏幕。3.在20-COMM-E属性屏幕上，单击组件详细信息选项卡。重要信息：此更新可能会导致适配器参数恢复为默认值。升级前，您可能需要使用DriveExecutive或HIM CopyCat功能保存配置。4.要启动闪存更新，请单击闪存更新按钮。
设备列表
然后从可用设备列表中选择20-COMM-E，然后单击下一步>。5.从可用更新列表中选择“4.001.xx完整”，然后单击“下一步”>。按照其余屏幕提示操作，直到闪存更新过程完成并显示新固件版本（v4.001）。20-COMM-E EtherNet/IP适配器固件v4.001 7使用ControlFLASH 1.安装了闪存套件（请参阅第5页的安装闪存套件），通过选择“开始”>“（所有）程序”>“闪存编程工具”>“ControlFLASH”来启动ControlFLASH。2.在ControlFLASH欢迎屏幕上，单击下一步>。3.从列表中选择20-COMM-E，然后单击下一步>。重要提示：此更新可能会导致适配器参数恢复为默认值。升级前，您可能需要使用HIM CopyCat功能、DriveExplorer或DriveExecutive保存配置。4.展开您正在使用的通信路径的树视图，然后选择代表您正在更新的20-COMM-E适配器的驱动器的驱动器图标。然后单击“确定”。5.在显示“找到多个程序集”窗口的情况下，从列表中选择“端口X-20-COMM-E”，然后单击“确认”。6.在显示“固件修订”窗口的状态下，从可用更新列表中选择”4.001.xx完整“，然后单击下一步>。按照其余屏幕提示操作，直到闪存过程完成并显示新固件版本（v4.001）。
Important information:
This update may cause the adapter parameters to return to their default values. Before upgrading, you may need to save the configuration using DriveExplorer or the HIM CopyCat feature. 4. To start the flash update, click the Flash Update... button. Then select 4.001.xx Complete from the list of available updates, and click Next>. Follow the remaining screen prompts until the flash update process is complete and the new firmware version (v4.001) is displayed. Use DriveExecutive 1. After installing the flash kit (see Installing the flash kit on page 5), start DriveEx and go online using the drive connected to the adapter (via EtherNet/IP or 1203-USB or 1203-SSS converters). 2. In the DriveExecutive tree view, click the 20-COMM-E adapter. Then click the information icon, as shown in Figure 2, to display the Properties screen of the adapter. 3. On the 20-COMM-E Properties screen, click the Component Details tab. Important: This update may cause the adapter parameters to return to their default values. Before upgrading, you may need to use DriveExecutive or HIM CopyCat to save the configuration. 4. To start the flash update, click the flash update button.
Equipment list
Then select 20-COMM-E from the list of available devices and click Next>. 5. Select 4.001.xx Complete from the list of available updates, and then click Next>. Follow the remaining screen prompts until the flash update process is complete and the new firmware version (v4.001) is displayed. 20-COMM-E EtherNet/IP adapter firmware v4.001 7 uses ControlFLASH 1. After installing the flash kit (see Installing the flash kit on page 5), start ControlFLASH by selecting Start>(All) Programs>Flash Programming Tool>ControlFLASH. 2. On the ControlFLASH welcome screen, click Next>. 3. Select 20-COMM-E from the list and click Next>. Important: This update may cause the adapter parameters to return to their default values. Before upgrading, you may need to save the configuration using the HIM CopyCat feature, DriveExplorer, or DriveExecutive. 4. Expand the tree view of the communication path you are using, and then select the drive icon representing the drive of the 20-COMM-E adapter you are updating. Then click OK. 5. With the "Multiple Assemblies Found" window displayed, select "Port X-20-COMM-E" from the list, and then click "OK". 6. With the Firmware Revision window displayed, select "4.001.xx Complete" from the list of available updates, and then click Next>. Follow the remaining screen prompts until the flash process is complete and the new firmware version (v4.001) is displayed.
