配件,3BHE024855R0101
适配器
步骤键示例屏幕1.在主菜单中，按向上箭头或向下箭头滚动到设备选择。2.按Enter键输入您的选择。3.按向上箭头或向下箭头滚动到20-COMM-E适配器。4.按Enter键选择适配器。将出现适配器的主菜单。5.按向上箭头或向下箭头滚动至诊断。6.按Enter键输入您的选择。7.按向上箭头或向下箭头滚动至设备版本。8.按Enter键显示Product Data（产品数据）屏幕。9.再次按Enter键以显示适配器的固件版本。
窗口中的信息图标
1.启动DriveExicutive并使用连接到适配器的驱动器联机（通过EtherNet/IP或1203-USB或1203-SSS转换器）。2.在DriveExecutive树视图中，单击20-COMM-E适配器，如图2所示。3.单击信息图标以显示适配器的属性屏幕。4.“版本：”字段显示适配器固件的当前版本（例如3.004）。步骤2步骤3步骤4 20-COMM-E EtherNet/IP适配器固件v4.001 5图2 DriveExecutive Window固件中的信息图标闪烁本节介绍了闪存升级适配器固件的步骤。Allen Bradley网站更新提供了驱动器和通信适配器的闪存套件，网址为http://www.ab.com/support/abdrives/webupdate。可以通过EtherNet/IP或1203-USB或1203-SSS转换器使用驱动器软件工具执行闪存。
Adapter
Step key example screen 1. In the main menu, press the up arrow or down arrow to scroll to device selection. 2. Press Enter to enter your selection. 3. Press the up arrow or down arrow to scroll to the 20-COMM-E adapter. 4. Press Enter to select the adapter. The main menu for the adapter appears. 5. Press up arrow or down arrow to scroll to diagnosis. 6. Press Enter to enter your selection. 7. Press the up arrow or down arrow to scroll to the device version. 8. Press Enter to display the Product Data screen. 9. Press Enter again to display the firmware version of the adapter.
Information icon in the window
1. Start DriveExecutive and use the drive connected to the adapter to connect online (via EtherNet/IP or 1203-USB or 1203-SSS converter). 2. In the DriveExecutive tree view, click the 20-COMM-E adapter, as shown in Figure 2. 3. Click the Info icon to display the Properties screen for the adapter. 4. The "Version:" field displays the current version of the adapter firmware (for example, 3.004). Step 2 Step 3 Step 4 20-COMM-E EtherNet/IP Adapter Firmware v4.001 5 Figure 2 The information icon in the DriveExecutive Window firmware flashes This section describes the steps to flash upgrade the adapter firmware. The Allen Bradley website update provides flash kits for drives and communication adapters at http://www.ab.com/support/abdrives/webupdate 。 Flash memory can be performed using the drive software tool via EtherNet/IP or 1203-USB or 1203-SSS converters.
