燃机卡 IS200WETCH1AAA
要点：
当20-COMM-E适配器连接到PowerFlex 750系列驱动器时，不支持CIP参数对象（类ID=0x0F）。•当20-COMM-E适配器连接到PowerFlex 750系列驱动器时，增加了对汉语、日语和韩语的支持。•更改了品牌兼容性，以允许20-COMM-E适配器在连接到VTAC品牌驱动器时运行。•为直通DPI参数对象（类ID 0x93和0x9F）添加了对8字节Get Scattered（服务代码0x4D）和8字节Set Scatterd（服务代码为0x4E）服务的支持。下表显示了访问每个端口设备参数的实例号转换：增强功能1纠正异常2确定固件版本3固件闪烁5限制8兼容版本8罗克韦尔自动化支持9产品满意度返回9实例（十六进制）（12月。)设备示例说明0x0000–0x3FFF 0–16383主机驱动器0类属性（驱动器）选项卡1驱动器参数1属性0x4400–0x47FF 17408–18431端口1
重要信息：
STRUCT在一条消息中最多可重复16次。•当使用RSLogix 5000 v17（或更高版本）和特定于驱动器的附加配置文件时，增加了对非计划I/O连接的支持，以在处理器保持运行模式时在线添加I/O。•增加了对EtherNet/IP上单播I/O连接的支持。•增加了对IP子网之间通过EtherNet/IP的I/O连接的支持。纠正的异常本节描述了此版本固件中纠正的异常：•纠正了第3类（消息传递）连接上消息传递重试的检测。•更正了适配器网页上的一个错误，即按下浏览器的刷新按钮会返回适配器主页。•使N42:3 PCCC控制超时值可读。
main points:
CIP parameter objects (class ID=0x0F) are not supported when the 20-COMM-E adapter is connected to PowerFlex 750 series drives. • When the 20-COMM-E adapter is connected to the PowerFlex 750 series drive, support for Chinese, Japanese, and Korean is added. • Brand compatibility changed to allow the 20-COMM-E adapter to run when connected to a VTAC branded drive. • Added support for 8-byte Get Scattered (service code 0x4D) and 8-byte Set Scattered (service code 0x4E) services for pass through DPI parameter objects (class IDs 0x93 and 0x9F). The following table shows the conversion of the instance number for accessing the device parameters of each port: enhancements 1. correcting exceptions 2. determining the firmware version 3. firmware flickering 5. restrictions 8. compatible versions 8. rockwell automation support 9. product satisfaction return 9. instances (hexadecimal) (December.) device example description 0x0000 – 0x3FFF 0 – 16383 host drive 0 class attribute (drive) tab 1. drive parameter 1 attribute 0x4400 – 0x47FF 17408 – 18431 port 1
Important information:
STRUCT can be repeated up to 16 times in a message. • When using RSLogix 5000 v17 (or later) and additional drive specific profiles, support for unplanned I/O connections has been added to add I/O online while the processor remains in running mode. • Added support for unicast I/O connections over EtherNet/IP. • Added support for I/O connection between IP subnets through EtherNet/IP. Corrected exceptions This section describes the exceptions corrected in this version of firmware: • Corrected the detection of message passing retries on type 3 (messaging) connections. • Corrected an error on the adapter web page, that is, pressing the browser's refresh button will return to the adapter home page. • Make the N42:3 PCCC control timeout value readable.
