DS200DTBDG1ABB燃机模块
DeltaV M系列传统
2通道，24V DC，高侧通道数32输出额定值每通道100 mA输出范围24V DC±10%关态泄漏0.1 mA最大本地总线电流（12V DC标称）100 mA典型值，每卡最大150 mA现场电路功率3.2 A@24V DC（+20%/-15%）隔离每个通道与系统光学隔离，并在工厂测试为1500V DC。单工DO（Plus）卡的简化电路和连接图，32通道，24V DC，高压侧。DeltaV M系列传统I/O 2022年10月www.emerson。com/deltav 25 DO卡规格，8通道，120/230V AC，隔离通道数8个隔离每个通道与250V AC下的系统和250V AC输出范围为20至250V AC的其他通道光学隔离，每个通道连续输出额定值1.0 A；每个卡最大2.0 A，最高60°C（140°F），每个卡最大3.0 A，最高50°C（122°F）关闭状态泄漏，在120V AC时最大2 mA，在230V AC本地总线电流（标称12V DC）时最大4 mA，每个卡典型100 mA，每卡最大150 mA现场电路功率，无可配置通道类型输出离散输出保持在控制器提交的最后状态。
预先配置
瞬时输出输出在预先配置的时间段（100 ms至100 s）内有效。连续脉冲输出输出在预配置的基本时间段（100 ms至100 s）中处于活动状态。分辨率=5 ms可选保险丝2.0 A DO卡的简化电路和连接图，8通道，120/230V AC，隔离。DeltaV M系列传统I/O 2022年10月www.emerson。com/deltav 26 DO卡规格，8通道，120/230V AC，通道的高侧数8个隔离每个通道在250V AC输出范围20至250V AC额定输出1.0 A下与系统进行光学隔离，每个通道连续2.0 A，每个卡最大2.0 A，最高60°C（140°F），每个卡最多3.0 A，最高50°C（122°F）关断状态泄漏，120V AC时最大2 mA，230V AC本地总线电流（标称12V DC）时最大4 mA，每个卡100 mA，120V A时每张卡最大150 mA现场电路功率3.0 A预配置的基本时间段（100 ms至100 s）的百分比。
DeltaV M-Series Legacy
2-channel, 24V DC, number of high side channels 32 Output rating 100 mA per channel Output range 24V DC ± 10% Closed state Leakage 0.1 mA Maximum local bus current (12V DC nominal) 100 mA typical value, maximum 150 mA per card Field circuit power 3.2 A@24V DC (+20%/- 15%) isolation Each channel is optically isolated from the system and tested at the factory to be 1500V DC. Simplified circuit and connection diagram of simplex DO (Plus) card, 32 channels, 24V DC, high voltage side. DeltaV M Series Traditional I/O October 2022 www emerson。 Com/deltav 25 DO card specification, 8 channels, 120/230V AC, 8 isolation channels, each channel is optically isolated from the system under 250V AC and other channels with 250V AC output range of 20 to 250V AC, and each channel has a continuous output rating of 1.0 A; Each card has a maximum of 2.0 A, a maximum of 60 ° C (140 ° F), a maximum of 3.0 A, a maximum of 50 ° C (122 ° F) closed state leakage, a maximum of 2 mA at 120 V AC, a maximum of 4 mA at 230 V AC local bus current (nominal 12 V DC), a typical 100 mA per card, a maximum of 150 mA field circuit power per card, and no configurable channel type output discrete output remains in the last state submitted by the controller.
Pre configured
The instantaneous output is valid for a pre configured time period (100 ms to 100 s). The continuous pulse output is active for a pre configured basic time period (100 ms to 100 s). Resolution=5 ms Simplified circuit and connection diagram for optional fuse 2.0 A DO card, 8-channel, 120/230V AC, isolated. DeltaV M Series Traditional I/O October 2022 www emerson。 Com/deltav 26 DO card specification, 8 channels, 120/230V AC, the number of high sides of the channel 8 isolation, each channel is optically isolated from the system under the 250V AC output range of 20 to 250V AC rated output 1.0 A. Each channel is 2.0 A continuous, each card is 2.0 A maximum, 60 ° C maximum (140 ° F), each card is 3.0 A maximum, 50 ° C maximum (122 ° F) off state leakage, maximum 2 mA at 120V AC, maximum 4 mA at 230V AC local bus current (nominal 12V DC), 100 mA per card, maximum 150 mA field circuit power per card at 120 V A 3.0 A percent of the preconfigured base time period (100 ms to 100 s).
