DS200DCFBG1BJB工控模块机器人备件
开路检测
C系列IO功能将能够检测并通过通道软故障指示通知开路现场线。详细规范–带HART参数规范输入/输出型号CC-PAOH51的模拟输出-带HART IOTA型号CC-TAOX51的高电平模拟输出-非冗余6“CC-TAOX 61冗余12”输出类型4-20 mA输出通道16输出纹波<100 mV，在电源线频率下，峰值电压250 负载输出温度漂移0.005%满量程/°C输出回读精度±4%满量程输出电流线性度±0.05%满量程标称分辨率±0.05%全量程校准精度±0.35%满量程（25oC），包括线性度直接设定输出电流范围0 mA，2.9 mA至21.1 mA最大电阻负载（24 V电源=22 VDC至28 VDC）800欧姆最大输出兼容电压（24 V供电=22 VDC到28 VDC）16 V最大开路电压22 V Experion C系列I/O规范，EP03-490-520 24版本1.5霍尼韦尔专有2021 12月参数规范响应时间（DAC输入代码到输出）在最大10 ms切换时输出到现场的80 ms间隙（0 mA）内沉降到最终值的1%以内（仅适用于冗余）
无需熔断注
1：不支持差分/电压输入。Experion Series-C输入/输出规范，EP03-490-520 11版本1.5霍尼韦尔专有2021 12月3。模拟输入–CC-PAIX01/02功能模拟输入模块接受来自变送器和传感设备的高电平电流或电压输入。显著特点广泛的自诊断可选冗余提供非易燃现场电源非易燃电源快速环路扫描详细规范–模拟输入参数规范输入/输出型号CC-PAIX02-高电平模拟输入IOTA型号非冗余冗余CC-TAIX01 CC-TAIX11 CC-GAIX21 CC-GAIX11 CC-TAID01 CC-TAID11输入类型1电压，电流（2线或自供电变送器）输入通道1 16通道（12单端/4差分）共模抑制比，直流至60 Hz（500 电源不平衡）70 dB共模电压，dc至60 Hz-6至+5 V峰值A/D转换器分辨率16位输入范围1 0至5 V，1至5 V、0.4至2 V、4-20 mA（至250Ω）正常模式抑制比，60 Hz时19 dB正常模式滤波器响应单极RC，6.5 Hz时-3 dB最大正常模式输入
Open circuit detection
The C series IO function will be able to detect and notify open field lines through channel soft fault indication. Detailed specification - Analog output with HART parameter specification input/output model CC-PAOH51 - High level analog output with HART IOTA model CC-TAOX51 - Non redundant 6 "CC-TAOX 61 redundant 12" output type 4-20 mA output channel 16 output ripple<100 mV at power line frequency, Peak voltage 250 Ω Load output temperature drift 0.005% Full range/° C Output back reading accuracy ± 4% Full range output current linearity ± 0.05% Full range nominal resolution ± 0.05% Full range calibration accuracy ± 0.35% Full range (25oC), including linearity Direct setting output current range 0 mA, 2.9 mA to 21.1 mA maximum resistive load (24 V power supply=22 VDC to 28 VDC) 800 ohms maximum output compatible voltage (24 V power supply=22 VDC to 28 VDC) 16 V maximum open circuit voltage 22 V Experion C series I/O specification, EP03-490-520 24 version 1.5 Honeywell proprietary 2021 December parameter specification response time (DAC input code to output
No fuse is required
1: Differential/voltage input is not supported. Experion Series-C input/output specification, EP03-490-520 11 version 1.5 Honeywell proprietary 2021 December 3. Analog Input – The CC-PAIX01/02 function analog input module accepts high-level current or voltage inputs from transmitters and sensing devices. Distinctive features Extensive self diagnostic optional redundancy provides non incendive field power supply Non incendive power supply Fast loop scanning Detailed specification - Analog input parameter specification Input/output model CC-PAIX02 - high-level analog input IOTA model Non redundant redundancy CC-TAIX01 CC-TAIX11 CC-GAIX21 CC-GAIX11 CC-TAID01 CC-TAID11 Input type 1 Voltage, current (2-wire or self powered transmitter) Input channel 1 16 channels (12 single ended/4 differential) Common mode rejection ratio, DC to 60 Hz (500 Ω power imbalance) 70 dB common mode voltage, dc to 60 Hz - 6 to+5 V peak A/D converter resolution 16 bit input range 1 0 to 5 V, 1 to 5 V, 0.4 to 2 V, 4-20 mA (to 250 Ω) normal mode rejection ratio, 19 dB normal mode filter response unipolar RC at 60 Hz, - 3 dB maximum normal mode input at 6.5 Hz
