DS200SLCCG3AEG工控备件
配置中
C系列I/O尺寸在几乎所有配置中，C300控制器和C系列I/O以比现有竞争对手和霍尼韦尔同等产品更小的占地面积提供了有用的、可维护的工艺设备连接。安装C系列I/O模块有助于节省总体安装成本。IOTA大小因应用而异。通常，模拟模块有16个点，位于非冗余应用的6英寸（152mm）IOTA和冗余应用的12英寸（304mm）IOTA上。离散模块有32个点，位于非冗余应用的9英寸（228mm）IOTA和冗余应用的12英寸（304mm）IOT上。型号表中描述了特定模块尺寸的具体信息。3.1.输入/输出模块功能•高级模拟输入/HART输入模块（16pt）–高级模拟输入模块支持高级模拟和HART输入。对于传统和HART设备，模拟输入通常为4-20mA DC。HART数据可用于状态和配置。HART数据，如二级和三级变量，也可用作过程控制变量。有两种版本可用。•高电平模拟输入w/o HART（16pt）-高电平模拟输出模块支持高电平模拟量输入。
传统设备
模拟量输入通常为4-20mA DC。•模拟输出/HART输出模块（16pt）–模拟输出模块支持标准4-20mA DC输出和HART变送器输出。有两种版本可用。•模拟输出w/o HART（16pt）–模拟输出模块支持标准4-20mA DC输出。•数字输入24 VDC（32pt）–24V信号的数字输入感应。有两种版本可用。•数字输入高压（32pt）–110 VAC、220 VAC、125 VDC的数字输入感应。•数字输出24 VDC（32 pt）–电流源数字输出。输出采用电子短路保护。有两种版本可用。•继电器数字输出（32 pt）–带NO或NC干触点的数字输出。可用于低功率或高功率应用。•温度多路复用器（64 pt）–提供热电偶（TC）和电阻温度装置（RTD）输入。多路复用器最多支持四个经现场验证的PMIO FTA。•温度多路复用器（64 pt）–提供热电偶（TC）和电阻温度装置（RTD）输入。多路复用器支持多达四个经现场验证的PMIO FTA•脉冲输入（8pt）–提供线性计数、PV生成和用于托管传输的四态输入•通用输入输出（32pt）–支持32通道用户可配置IO。可用选项–模拟输入、模拟输出、数字输入和数字输出。C系列现场连接器最多可接受12ga AWG/2.5mm绞合线。Experion Series-C输入/输出规范，
Configuring
C series I/O size In almost all configurations, the C300 controller and C series I/O provide a useful and maintainable process equipment connection with a smaller footprint than existing competitors and Honeywell's equivalent products. Installing C series I/O modules can help save overall installation costs. IOTA size varies by application. Typically, the analog module has 16 points, located on a 6-inch (152mm) IOTA for non redundant applications and a 12 inch (304mm) IOTA for redundant applications. The discrete module has 32 points, located on a 9-inch (228mm) IOTA for non redundant applications and a 12 inch (304mm) IOT for redundant applications. The model table describes the specific information of the specific module size. 3.1. I/O Module Functions • Advanced Analog Input/HART Input Module (16pt) – The advanced analog input module supports advanced analog and HART inputs. For conventional and HART devices, the analog input is typically 4-20mA DC. HART data is available for status and configuration. HART data, such as secondary and tertiary variables, can also be used as process control variables. Two versions are available. • High level analog input w/o HART (16pt) - High level analog output module supports high level analog input.
Traditional equipment
Analog input is usually 4-20mA DC. • Analog Output/HART Output Module (16pt) – The analog output module supports standard 4-20mA DC output and HART transmitter output. Two versions are available. • Analog Output w/o HART (16pt) – The analog output module supports standard 4-20mA DC output. • Digital Input 24 VDC (32pt) – Digital input sensing of 24V signals. Two versions are available. • Digital Input High Voltage (32pt) – Digital input sensing for 110 VAC, 220 VAC, 125 VDC. • Digital Output 24 VDC (32 pt) – Current source digital output. The output adopts electronic short circuit protection. Two versions are available. • Relay Digital Output (32 pt) – Digital output with NO or NC dry contacts. Available for low or high power applications. • Temperature Multiplexer (64 pt) – Provides thermocouple (TC) and resistance temperature device (RTD) inputs. The multiplexer supports up to four field proven PMIO FTAs. • Temperature Multiplexer (64 pt) – Provides thermocouple (TC) and resistance temperature device (RTD) inputs. The multiplexer supports up to four field proven PMIO FTA • Pulse Inputs (8pt) – providing linear counting, PV generation, and quad inputs for managed transmission • Universal Inputs and Outputs (32pt) – supporting 32 channels of user configurable IO. Available options – Analog Input, Analog Output, Digital Input, and Digital Output. C series field connectors can accept up to 12ga AWG/2.5mm stranded wire. Experion Series-C input/output specifications,
