DI810 3BSE008508R1输入输出模块
程序操作将重新打开
停止在[按键操作]操作屏幕中，单击 单击后按键 钥匙[操作屏幕]･程序操作停止。･在运行状态下启用。▪如果在运行状态下执行STOP，程序模式（SV和时间）停止，此时SV是程序模式停止时的设定值，是固定输出。4.ADV In[按键操作]操作屏幕点击 单击后按键 钥匙[操作屏幕]･正在推进（进度）步骤。･它在运行状态或停止状态下启用如果ADV操作在RUN状态下完成，程序操作从高级步骤开始继续。如果ADV操作在STOP状态下完成，程序操作在高级步骤开始时具有STOP状态在一次ADV操作中，进度是一个步骤，因此在多个进度步骤中执行许多ADV操作。5.PTN In[按键操作]操作屏幕点击 单击后按键 钥匙之后，使用， 钥匙 钥匙[操作屏幕]･选择图案编号。･它在RESET状态下启用。･在RESET（复位）状态下，通过单击获得模式编号选择状态 后面的键 钥匙之后，通过使用 键或 键，选择要执行操作的模式编号。此时，在PTN编号中选择的编号显示在上显示屏中。
快速进入
按键操作 操作屏幕按住 单击后按键 钥匙[操作屏幕]･这是程序模式的FAST（快进）状态。･在运行状态下启用。▪如果在RUN状态下再次执行RUN操作，程序模式从“次数”的速度前进到“次数的十倍”的速度 键被单击。什么时候 键被释放，FAST状态被取消在FAST状态下，根据程序模式输出时间信号输出。然而，时间误差变得更大。Ú限于外部信号输出、时间信号布局和设置时间的规格ADV操作一直进行到步骤编号的开始，但是快速操作可以进行到程序模式（或步骤）的中间。如果运行操作完成，指示运行操作的文字将显示在操作屏幕左侧的3步快速显示中。
Program operation will be reopened
Stop On the [Key Operation] operation screen, click the button element key [Operation Screen] after clicking on it Enabled in the running state. ▪ If STOP is executed in the running state, the program mode (SV and time) stops. At this time, SV is the set value when the program mode stops, and it is a fixed output. 4. On the ADV In [key operation] operation screen, click to start the key element key [operation screen] after clicking It is enabled in the running state or the stopped state. If the ADV operation is completed in the RUN state, the program operation continues from the advanced step. If the ADV operation is completed in the STOP state, the program operation has the STOP state at the beginning of the advanced step. In one ADV operation, the progress is a step, so many ADV operations are performed in multiple progress steps. 5. On the PTN In [key operation] operation screen, click the button element key after clicking, and then use it. The key is not the key [operation screen] ¥ Select the pattern number. ¥ It is enabled in the RESET state In the RESET status, click to obtain the key element key behind the mode number selection status, and then select the mode number to perform the operation by using the Start key or the Not yet key. At this time, the number selected in the PTN number is displayed in the upper display screen.
Fast entry
Key operation operation screen Press and hold the key element key [operation screen] after clicking. This is the FAST (fast forward) status of the program mode Enabled in the running state. ▪ If the RUN operation is executed again in the RUN state, the key "No" is clicked when the program mode advances from the speed of "Times" to the speed of "Times". When the key is released and the FAST status is cancelled, the time signal is output according to the program mode. However, the time error becomes greater. Ú The specification ADV operation limited to external signal output, time signal layout and setting time is carried out until the beginning of step number, but the quick operation can be carried out to the middle of the program mode (or step). If the running operation is completed, the text indicating the running operation will be displayed in the 3-step quick display on the left side of the operation screen.
