DC732F工控备件模块
通信协议
通信2端口规范 ① 仅显示有通信的仪器。② 设置通信协议。③ 如果选择“MODBUS（RTU）”，则显示MODBUS。④ 如果选择“MODBUS（ASCII）”，则显示MODBUS。⑤ 如果选择“PRIVATE”（私人），则显示通常的CHINO协议。⑥ 在通信2端口规格的情况下，此设置屏幕将成为COM1的通信协议。⑦ 当仪器具有数字输出和通信规范时，此设置屏幕将成为通信的通信协议。然而，当选择数字输出为“RS485”和通信规格为“RS422A”的组合时，此屏幕将成为数字输出的通信协议。
COM2的通信速度
① 在通信2端口或数字输出规格中，仅当选择“COM”时，才会显示通信2端口功能选择。② 当仪器具有通信2端口规格时，设置COM2的通信速度。③ 当仪器具有数字输出规格时，设置数字输出的通信速度。然而，当选择数字输出为“RS485”和通信规格为“RS422A”的组合时，此屏幕将成为通信的通信速度。
communication protocol
Communication 2 port specification ① only displays instruments with communication. ② Set the communication protocol. ③ If "MODBUS (RTU)" is selected, MODBUS is displayed. ④ If "MODBUS (ASCII)" is selected, MODBUS is displayed. ⑤ If "PRIVATE" is selected, the usual CHINO protocol is displayed. ⑥ In case of communication 2 port specification, this setting screen will become the communication protocol of COM1. ⑦ When the instrument has digital outputs and communication specifications, this setup screen becomes the communication protocol for communication. However, when the combination of digital output "RS485" and communication specification "RS422A" is selected, this screen will become the communication protocol of digital output.
Communication speed of COM2
① In the communication 2 port or digital output specification, the communication 2 port function selection is displayed only when "COM" is selected. ② When the instrument has communication 2 port specification, set the communication speed of COM2. ③ When the instrument has a digital output specification, set the communication speed of the digital output. However, when the combination of digital output "RS485" and communication specification "RS422A" is selected, this screen will become the communication speed of communication.
