CP-C备件模块
剩余时间显示
① 在左下角，显示三个步骤的快速显示，中间的执行步骤及其上一步和下一步。在运行状态下，中间的执行步骤闪烁。② 上侧是与程序模式的进度时间相对应的条形图，右下方是以数字方式显示进度时间。③ 在模式1的“时间显示系统”中，可从4种选项中选择进度时间。STP･･・･执行步骤显示PTN･･·･执行模式显示时间格式（H:M）根据模式或步骤的时间长度自动更改/显示。时间显示系统也可以通过使用 钥匙6-2程序模式总体显示屏幕时间显示屏幕屏幕描述[程序重置条件][程序运行条件][未设置程序条件]① 它是设置在模式2的程序模式，并显示所选设置编号的简短程序模式。② 当处于“运行”状态时，将显示闪烁条，并且条会根据状态移动。③ 如果置于STOP（停止）状态，当程序停止时，条形图将变亮并停止。④ 表示横轴为时间，纵轴为SV。未设置程序模式时，显示[模式未设置]。-21-6-3.操作屏幕和设置屏幕操作屏幕和设定屏幕之间的关系如下。
时间显示操作屏幕
[模式0模式屏幕][程序整体显示操作屏幕][正在执行的时间和SV设置屏幕]① 当电源接通且显示初始信息后，将显示操作屏幕。② 在设置屏幕中，如果三分钟或更长时间未操作按键，则会自动返回操作屏幕。③ 存储最后显示的操作屏幕（时间显示屏幕或程序模式整体显示屏幕），并在从电源插入或设置屏幕返回后显示该操作屏幕。操作屏幕 设置屏幕▪･･ - 22-7.设置屏幕7-1.设置7-1-1的基本知识。
The remaining time
(1) is displayed in the lower left corner, showing the quick display of three steps, the middle execution step and its previous and next steps. In the running state, the middle execution step flashes. ② The upper side is a bar chart corresponding to the progress time of the program mode, and the lower right side is a bar chart that displays the progress time in a numerical way. ③ In Mode 1 "Time Display System", you can select progress time from 4 options. STP ❑ ・ Execution step display PTN ・ ・ Execution mode display time format (H: M) automatically changes/displays according to the time length of the mode or step. The time display system can also use the commercial key 6-2 program mode to display the overall screen time display screen screen description [Program reset condition] [Program operation condition] [Program condition not set] ① It is the program mode set in mode 2, and displays the short program mode of the selected setting number. ② When in the "Running" state, a flashing bar is displayed, and the bar moves according to the state. ③ If it is placed in the STOP state, the bar graph will light up and stop when the program stops. ④ It indicates that the horizontal axis is time and the vertical axis is SV. When the program mode is not set, [Mode Not Set] is displayed- 21-6-3. The relationship between the operation screen and the setting screen is as follows.
Time display operation screen
[Mode 0 Mode Screen] [Program Overall Display Operation Screen] [Running Time and SV Setting Screen] ① When the power is turned on and initial information is displayed, the operation screen will be displayed. ② In the setting screen, if the key is not operated for three minutes or more, it will automatically return to the operation screen. ③ Stores the last displayed operation screen (time display screen or program mode overall display screen), and displays the operation screen after returning from the power insertion or setting screen. Operation screen and setting screen ▪･･ Above - 22-7. Setting screen 7-1. Basic knowledge of setting 7-1-1.
