CB801模拟量输入模块
基本系统
5.1包括一个操作员工作区、一个工程工作区、AC 800M连接、冗余方面服务器、Plant Explorer、拓扑状态查看器、Softpoint服务器、调度器、主要历史日志（最多3个月的操作员趋势信号记录）、10个资产监视器和诊断收集。用户快速登录。文章编号：基本系统，5.1 3BSE061234R1标签所有带面板的过程对象，用于操作员交互，都算作标签。（总计最多120000。不能与冗余标签混合）。注：在价格手册发布时，需要为具有60000多个标签的系统提供TSA。订购前，请在TSA数据库中检查TSA的当前需求。非冗余标签物品编号100标签，非冗余，5.1 3BSE061235R1 1000标签，非多余，5.1 3SSE061235 R2 10000标签，非重复，5.1 3PSE061233R3所有带有操作员面板的过程对象都算作一个标签。（总计最多120000。不能与非冗余标签混合）。（通过冗余连接服务器启用标签访问。）冗余标签物品编号100标签，冗余，5.1 3BSE061236R1 1000标签，冗余、5.1 3BSE1061236R2 10000标签，冗余和5.1 3BSE2061236R3多系统集成配置中订户系统中的多系统集成标签。这些标签是带有面板的对象，用于从提供者系统收集数据。请注意，非冗余多系统用户标签不能与多系统用户冗余标签混合使用。多系统集成配置中订户系统中的标签。注：在价格手册发布时，此项目需要订购TSA。订购前，请在TSA数据库中检查TSA的当前需求。多系统订户标签文章编号100多系统订阅者标签3BSE072204R1 1000多系统订用户标签3BSE 072204R2 10000多系统订主标签3BSE1072204R3多系统订订者冗余标签文章编号：100多系统用户冗余标签3BSE2072205R1 1000单系统订户冗余标签3SSE072205R2 10000多个系统订户多余标签3BSE-072205R3系统产品目录|软件9连接性请注意，可能有特定OCS控制器不支持的价目表选项。请参阅系统指南“技术数据和配置信息”中的“每个控制器连接的可用功能”表。
要检查哪些连接组合有效
请使用项目向导或参阅《系统系统指南》以获取信息。Advant Master第5.1条（每个系统一个）RTA硬件需要单独订购。有关RTA硬件，请参考价格手册3BSE001706，Advant OCS with Master Software。3BSE061237R1 Advant Master中央备份，5.1 Advant主控制器（AC410、AC450、MP200/1、SG400）的应用程序备份和恢复每个系统一个许可证。需要Advant Master。注：在价格手册发布时，此项目需要订购TSA。订购前，请在TSA数据库中检查TSA的当前需求。3BSE070712R1用于MOD 300，5.1（每个系统一个）RTA硬件需要单独订购。RTA硬件请参考价格手册3BSE001709，Advant OCS with MOD 300 SW。3BSE061238R1用于Harmony，5.1（每个系统一个）3BSE06 1239R1用于DCI，5.1连接Harmony分布式控制单元（HDCU），包括：批量连接、VB6和PG2面板、HDCU维护功能。3BSE064196R1适用于AC 870P/Melody，5.1（不包括面板）。（每个系统一个）3BSE061240R1 PLC连接，5.1（每个系统1个）3SSE061242R1 PLC拨号连接，5.1。3BSE061243R1用于安全防护，5.1（每个系统一个。）Advant Master也需要。3BSE061244R1适用于AC 100 AC 100连接包，包括图形元素、面板、OPC服务器，需要在.3BSE064565R1100历史记录、800xA 5.1 3BSE06 1266R1 1000历史记录、800 xA 5.1 3 BSE06 1277R1 15000历史记录、8000 xA 5.1 4BSE06 128 R1双历史记录中使用AC 100控制器用于两个历史记录服务器中的并行记录。（需要两台Basic Historian服务器）。系统中初始信息管理分层日志的数量。要记录的每个信号计为一个日志。注意：信息管理仅提供分层日志。（总共最多150000个，最多50000个/服务器。）文章编号：100个双历史记录日志，800xA 5.1 3BSE061269R1 1000个双历史日志，800x a 5.1 3SSE061270R1 15000个双历史历史日志，800 xA 5.1 5BSE061271R1信息管理系统800xA产品目录|软件17个合并历史记录合并日志从多个历史记录服务器收集数据并将其存储在一个位置。这为查看和报告提供了一个通用的历史存储库。
Basic system
5.1 It includes an operator work area, an engineering work area, AC 800M connection, redundant aspect server, Plant Explorer, topology status viewer, Softpoint server, scheduler, main historical logs (operator trend signal records for up to 3 months), 10 asset monitors, and diagnostic collection. User quick login. Article No.: Basic system, 5.1 3BSE061234R1 label All process objects with panels used for operator interaction are regarded as labels. (Up to 120000 in total. Cannot be mixed with redundant labels). Note: TSA is required for systems with more than 60000 tags when the price manual is released. Before ordering, please check the TSA's current requirements in the TSA database. Non redundant label Article number 100 label, non redundant, 5.1 3BSE061235R1 1000 label, non redundant, 5.1 3SSE061235 R2 10000 label, non repetitive, 5.1 3PSE061233R3 All process objects with operator panel are counted as one label. (Up to 120000 in total. Cannot be mixed with non redundant labels). (Label access is enabled through a redundant connection server.) Redundancy tag article number 100 tag, redundancy, 5.1 3BSE061236R1 1000 tag, redundancy, 5.1 3BSE1061236R2 10000 tag, redundancy and 5.1 3BSE2061236R3 multi system integration tag in subscriber system integration configuration. These tags are objects with panels for collecting data from the provider system. Please note that the non redundant multi system user tag cannot be mixed with the multi system user redundant tag. The label in the subscriber system in a multi system integration configuration. Note: TSA needs to be ordered for this project when the price manual is issued. Before ordering, please check the TSA's current requirements in the TSA database. Multi system subscriber label Article number 100 Multi system subscriber label 3BSE072204R1 1000 Multi system subscriber label 3BSE 072204R2 10000 Multi system subscriber label 3BSE1072204R3 Multi system subscriber redundancy label Article number: 100 Multi system user redundancy label 3BSE2072205R1 1000 Single system subscriber redundancy label 3SSE072205R2 10000 Multi system subscriber redundancy label 3BSE-072205R3 System product catalog | Software 9 Connectivity Please note that, There may be price list options that are not supported by specific OCS controllers. Refer to the Available Features per Controller Connection table in the Technical Data and Configuration Information in the system guide.
To check which connection combinations are valid
Use the project wizard or refer to the System System Guide for information. Article 5.1 (one for each system) of the AdvantMaster RTA hardware needs to be ordered separately. For RTA hardware, please refer to the Price Manual 3BSE001706, AdvantOCS with Master Software. 3BSE061237R1 Advantmaster central backup, 5.1 Advantmaster master controller (AC410, AC450, MP200/1, SG400) application backup and restore one license per system. AdvantMaster is required. Note: TSA needs to be ordered for this project when the price manual is issued. Before ordering, please check the TSA's current requirements in the TSA database. 3BSE070712R1 is used for MOD 300. 5.1 (one for each system) RTA hardware needs to be ordered separately. For RTA hardware, please refer to the Price Manual 3BSE001709, AdvantOCS with MOD 300 SW. 3BSE061238R1 is used for Harmony, 5.1 (one for each system) 3BSE06 1239R1 is used for DCI, and 5.1 is used to connect Harmony Distributed Control Unit (HDCU), including batch connection, VB6 and PG2 panels, and HDCU maintenance functions. 3BSE064196R1 is applicable to AC 870P/Melody, 5.1 (excluding panel). (One for each system) 3BSE061240R1 PLC connection, 5.1 (one for each system) 3SSE061242R1 PLC dial-up connection, 5.1. 3BSE061243R1 is used for safety protection, 5.1 (one for each system.) AdvantMaster also needs it. 3BSE061244R1 is applicable to the AC 100 AC 100 connection package, including graphic elements, panels, and OPC servers 3BSE064565R1100 history, 800xA 5.1 3BSE06 1266R1 1000 history, 800 xA 5.1 3 BSE06 1277R1 15000 history, 8000 xA 5.1 4BSE06 128 R1 dual history The AC 100 controller is used for parallel records in two history servers. (Two Basic Historian servers are required). The number of initial information management hierarchical logs in the system. Each signal to be recorded is counted as a log. Note: Information management only provides hierarchical logs. (Up to 150000 in total, up to 50000 per server.) Article No.: 100 dual history logs, 800xA 5.1 3BSE061269R1 1000 dual history logs, 800x a 5.1 3SSE061270R1 15000 dual history logs, 800 xA 5.1 5BSE061271R1 information management system 800xA product directory | software 17 merge history merge logs Collect data from multiple history servers and store them in one location. This provides a common historical repository for viewing and reporting.
