AL26-22-00工控卡件
励磁系统
如果UNITROL 5000励磁系统出现问题，您可以通过远程诊断快速、经济地获得帮助。远程故障排除和故障纠正的可能性节省了旅行和住宿成本。为了使用远程诊断选项，客户需要为每个电压调节器通道插入一个附加板（CAP）。RJ45插座用于通过以太网电缆与局域网（LAN）或通过以太网路由器和调制解调器与电话网络连接。CAP和PC之间也可以通过以太网电缆直接连接。不仅所有重要信号和参数值，数据和事件记录器也可用于数据交换。舒适的AVR视图“AVR视图”是Microsoft远程诊断的用户界面™ Windows®2000支持以下功能：•显示运行状态•显示信号和参数•更改参数•下载和显示事件记录器条目•（自动）下载和编辑数据记录器内容•设置实时时钟和数据记录器功能。AVRview使远程诊断与现场服务一样简单。在系统故障、问题分析、故障纠正和优化的情况下，可以通过互联网为客户提供支持–这对UNITROL 5000的位置没有任何影响！硬件和软件的组合图7：状态显示提供了励磁系统运行状态的最重要信息图8：在“选择窗口”（上面）中，可以选择任何信号进行总体概述；“数据记录器窗口”以图形方式表示存储的信号
Excitation system
If problems occur with the UNITROL 5000 excitation system, you can get help quickly and economically through remote diagnosis. The possibility of remote troubleshooting and fault correction saves travel and accommodation costs. In order to use the remote diagnostic option, the customer needs to insert an additional board (CAP) for each voltage regulator channel. The RJ45 socket is used to connect to a local area network (LAN) via an Ethernet cable or to a telephone network via an Ethernet router and modem. The CAP and PC can also be directly connected via Ethernet cable. Not only all important signals and parameter values, but also data and event recorders can be used for data exchange. Comfortable AVR view "AVR view" is the user interface of Microsoft remote diagnosis ™ Windows ® The 2000 supports the following functions: • Display operation status • Display signals and parameters • Change parameters • Download and display event recorder entries • (automatically) Download and edit data logger contents • Set real-time clock and data logger functions. AVRview makes remote diagnosis as simple as on-site service. In the case of system failure, problem analysis, fault correction and optimization, customers can be supported through the Internet – this has no impact on the location of UNITROL 5000! Combination of hardware and software Figure 7: Status display provides the most important information about the operating status of the excitation system Figure 8: In the "Selection window" (above), you can select any signal for general overview; The Datalogger Window graphically represents the stored signals
