3HAC17484-902模块备件
模块系列
手册是（CLX）PROFIBUS从模块系列SST-PB3S-CLX-RLL、SST-PB3CLX-RLL-CC、SST-PB3S-CLXT-RLL的用户指南，本指南通篇统称为。如果您负责安装、编程或故障排除使用AllenBradley CLX处理器和SST-PB3S-CLX-RLL从模块系列的控制系统，请使用本指南。假设您对PLC有基本了解，并且熟悉PROFIBUS模块和PROFIBU网络。特殊符号本指南中使用了以下特殊符号：警告警告信息提醒读者可能导致人身伤害的情况。警告伴随着所示符号，并位于所指主题之前。警告警告信息提醒读者可能导致设备损坏的情况。警告伴随着所示的符号，并在它们所指的主题之前。注释注释提供了附加信息，强调了一个要点，或给出了一个更容易操作的提示。注释随附所示符号，并遵循参考文本。1.1系统概述1.1.1从机功能SST-PB3S-CLX-RLL是用于1756（ControlLogix）背板系统的PROFIBUS从机专用接口。
它支持CLX处理器
Profibus网络上的Profibus从设备之间的通信。模块：•支持标准ControlLogix或ControlLogix-XT平台•支持罗克韦尔的RSLogix 5000附加配置文件（AOP）•支持每个从模块1-122个字的输入数据和1-122个字符的输出数据，最多可进行244个字的数据交换•可驻留在本地或远程CLX机箱的任何插槽中。•支持所有标准PROFIBUS波特率（9600、19200、45.45k、93.75k、187.5k、500k、1.5M、3M、6M、12M）•充当DP-V0从接口•支持：网络中的PROFIBUS中继器、数据交换、自动运行模式、传统设备ID、，诊断LED和模块前滚动LCD显示器•不需要CLX中的梯形逻辑来传输数据或配置设置•直接更换模块以快速更换模块•可以作为仅配置为从机（使用Profibus ID 0x0876）的传统SST-PFB-CLX模块的直接替换•通过ControlLogix配置文件进行从机配置•从机通过AOP接口进行配置，自动更新配置文件
Module family
The manual is the user guide of (CLX) PROFIBUS slave module series SST-PB3S-CLX-RLL, SST-PB3CLX-RLL-CC, SST-PB3S-CLXT-RLL. This reference is collectively referred to as. Use this guide if you are responsible for installing, programming, or troubleshooting a control system that uses the Allen Bradley CLX processor and SST-PB3S-CLX-RLL slave module family. Suppose you have a basic understanding of PLC and are familiar with PROFIBUS module and PROFIBUS network. Special Symbols The following special symbols are used in this guide: WarningWarningWarningMessages alert readers to situations that may cause personal injury. The warning is accompanied by the symbol shown and precedes the subject to which it refers. Warnings Warnings alert readers to situations that may cause damage to the equipment. Warnings are accompanied by the symbols shown and precede the subject to which they refer. Notes Notes provide additional information, highlight an important point, or give a hint for easier operation. Notes are accompanied by the symbols shown and follow the reference text. 1.1 System overview 1.1.1 Slave function SST-PB3S-CLX-RLL is a special PROFIBUS slave interface for the 1756 (ControlLogix) backplane system.
It supports CLX processors
Communication between Profibus slave devices on a Profibus network. Modules: • Support the standard ControlLogix or ControlLogix XT platform • Support Rockwell's RSLogix 5000 Additional Configuration File (AOP) • Support 1-122 words of input data and 1-122 characters of output data from each slave module, and up to 244 words of data can be exchanged • Can reside in any slot of the local or remote CLX chassis. • Support all standard PROFIBUS baud rates (9600, 19,200, 45.45k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M) • Serve as DP-V0 slave interface • Support: PROFIBUS repeater in the network, data exchange, automatic operation mode, traditional device ID, Diagnostic LED and LCD display scrolling in front of the module • Ladder logic in the CLX is not required to transmit data or configure settings • The module is replaced directly to quickly replace the module • It can be used as a direct replacement for traditional SST-PFB-CLX modules that are only configured as slave computers (using Profibus ID 0x0876) • Slave computers are configured through ControlLogix configuration files • Slaves are configured through the AOP interface and the configuration files are updated automatically
