3BSE013230R1-TU810V1 模拟量输入模块
机械设计
UNITROL 1020将高性能控制和电源电路与简单的机械设计相结合。该结构为广泛的小型应用提供了平台，包括在高要求的概述环境条件下的应用。此外，通过将电源和测量端子与I/O连接器分离，可以实现高水平的EMC抗扰度。聚合物外壳保护所有带电部件，防止电击。电源和测量端子–规定最大持续电流为30 A，最大电缆为4 mm2（AWG 24–10）–用于可靠连接的拉伸弹簧端子–易于访问测试点本地人机界面–直观的本地控制面板，用于指示AVR状态，有源限制器和测量–可以接管本地控制以改变参数模拟和数字输入和输出，串行现场总线张力弹簧连接器允许可靠接线和快速更换。USB端口–连接CMT1000（调试和维护工具）–设备配置、事件和数据上传，无需任何其他电源指示LED–绿色：电源开启，闪烁表示软件正在运行–黄色：励磁开启，闪烁指示限制器激活–红色：报警，闪烁表示启动错误以太网端口–连接CMT1000–通过Modbus TCP远程访问实心铝基板–坚固的机械设计允许在高振动应用中使用。–可直接安装在机器接线盒内。
显示默认操作模式
显示根据激活菜单箭头显示默认操作模式、机器电压和励磁机电流软键按钮功能导航菜单或设置参数本地人机界面提供AVR状态的即时数据。UNITROL 1010是一款功能有限的紧凑型设备，设计用于额定电流高达10 a的励磁电流。它支持与UNITROL 1020相同的接口，并具有相同的机械占地面积。UNITROL1000-PM40是一种电源模块，可将UNITROL2020的输出电流扩展至40 A。UNITROL 1000系列具有可自由配置的测量和模拟或数字I/O。通过本地人机界面或CMT1000软件进行配置。电源端子–三相励磁电源输入–三相辅助电源输入（控制电源）–励磁输出测量端子–三相电机电压–单相网络电压–单相电机电流模拟I/O–2个输出/3个输入（可配置）–+10 V/-10 V参考输出数字I/O–仅4个输入（配置）–8个输入/输出（可配置）–24 V输出（600 mA）用于外部继电器串行现场总线–RS485用于Modbus RTU或VDC通信–CAN用于双通道通信
machine design
UNITROL 1020 combines high-performance control and power circuits with simple mechanical design. This architecture provides a platform for a wide range of small applications, including applications in demanding overview environmental conditions. In addition, by separating the power supply and measurement terminals from the I/O connector, a high level of EMC immunity can be achieved. The polymer housing protects all live parts from electric shock. Power supply and measurement terminals – the specified maximum continuous current is 30 A, the maximum cable is 4 mm2 (AWG 24 – 10) – tension spring terminals for reliable connection – easy access to the local human-machine interface of the test point – intuitive local control panel for indicating AVR status, active limiter and measurement – can take over local control to change parameter analog and digital input and output, The serial field bus tension spring connector allows reliable wiring and rapid replacement. USB port – connect CMT1000 (debugging and maintenance tools) – equipment configuration, event and data upload, without any other power indicator LED – green: power on, flashing indicates that the software is running – yellow: excitation on, flashing indicates that the limiter is active – red: alarm, Flashing indicates that the wrong Ethernet port is started – connected to CMT1000 – remote access to solid aluminum substrate via Modbus TCP – rugged mechanical design allows for use in high vibration applications. – It can be directly installed in the machine junction box.
Display the default operating mode
The display displays the default operation mode, machine voltage and exciter current soft key function navigation menu or the local human-machine interface of setting parameters according to the activation menu arrow to provide real-time data of AVR status. UNITROL 1010 is a compact device with limited functions, designed for excitation currents with rated currents up to 10 a. It supports the same interface as UNITROL 1020 and has the same mechanical floor area. UNITROL1000-PM40 is a power module that can expand the output current of UNITROL2020 to 40 A. UNITROL 1000 series has freely configurable measurement and analog or digital I/O. Configure via local HMI or CMT1000 software. Power terminal – three-phase excitation power input – three-phase auxiliary power input (control power supply) – excitation output measurement terminal – three-phase motor voltage – single-phase network voltage – single-phase motor current analog I/O – 2 outputs/3 inputs (configurable) –+10 V/- 10 V reference output digital I/O – only 4 inputs (configurable) – 8 inputs/outputs (configurable) – 24 V output (600 mA) For external relay serial field bus – RS485 for Modbus RTU or VDC communication – CAN for dual channel communication
