6231BP10910工控产品PLC/DCS系统模块
规范有关环境规范和符合标准的要求
请参阅PACSystems RX7i安装手册GFK-2223的附录A。电池：内存保留有关电池的选择、安装和估计寿命，请参阅《PACSysts控制器电池和能量包手册》GFK-2741。程序存储高达64 MB的电池支持RAM 64 MB的非易失性闪存用户内存电源要求：CRE030 CRE040+5 VDC:3.2安培标称+12 VDC:0.003安培标称-12 VDC:0.003安培额定+5 VDC:6.8安培标称+11 VDC:.003安培额定-12 VDC:0.003安培标称工作温度：CRE03 CRE0400 0至50°C（32°F至122°F）0至60°C（30°F至140°F），带风扇托盘0至60°C（32°F至140°F），风扇托盘要求布尔执行速度，典型值：CRE030 CRE040 0.069ms每1000个布尔触点/线圈0.024ms每1000个Boolean触点/线圈日间时钟精度最大漂移±2秒/天运行时钟（内部计时）精度±0.01%最大嵌入式通信RS-232、RS-485、，以太网接口串行协议支持Modbus RTU从站、SNP、串行I/O以太网端口嵌入式自动传感10/100 Mbps半双工/全双工以太网接口VME兼容性系统，旨在支持VME64标准ANSI/VITA 1程序块多达512个程序块。块的最大大小为128KB。内存（有关内存区域的详细列表，请参阅《CPU参考手册》，GFK-2222。）%I和%Q:32K位，用于离散%AI和%AQ：可配置最多32K%W：可配置最大可用用户RAM管理内存（符号和I/O变量组合）：可配置最高达10MB以太网接口规范基于Web的数据监控最多16个Web服务器和FTP连接（组合）以太网数据速率10Mb/s和100Mb/s物理接口10BaseT RJ45 WinLoader支持是基于EGD配置的页数255时间同步SNTP选择性使用EGD是将EGD配置从RX7i加载到编程器是通过UDP远程Station Manager是本地Station Manager（RS-232）专用RS-232端口可配置高级用户参数对
扩展操作
CPU功能兼容性主题描述不允许使用不同的CPU型号进行扩展操作在正常操作期间，HSB冗余系统中的主要和次要单元必须具有相同的CPU型号类型。不允许使用不同CPU类型的扩展操作。具有不同CPU型号类型的主单元和辅助单元可以在有限的时间内同步，仅用于系统升级。不同冗余对中高性能CPU的故障等待时间可能需要增加以允许同步。任何一种型号都可以在主单元或辅助单元中。编程器版本要求▪ Proficy*Machine Edition Logic Developer PLC 7.0 SIM5或更高版本必须用于6.75版新功能。▪ Proficy Machine Edition Logic Developer PLC 6.0或更高版本必须用于版本6.00的新功能。▪ Proficy Machine Edition Logic Developer 5.8或更高版本必须用于5.50版新功能。▪ Proficy Machine Edition Logic Developer 5.7或更高版本必须用于5.00版新功能▪ Proficy Machine Edition Logic Developer 5.5 Service Pack 2或更高版本必须用于4.00版新功能。▪ Proficy Machine Edition Logic Developer 5.0 Service Pack 3或更高版本必须用于编程CPU以进行Modbus/TCP服务器操作。C工具包兼容性PACSystems的C工具包随Proficy Machine Edition Logic Developer一起分发。更新可从下载http://www.ge-ip.com/support.LREAL数据类型支持需要C Toolkit版本5.50或更高版本。当PACSystems CPU包含固件版本5.00或更高版本时，需要C Toolkit版本5.00 Build 16C1或更高。注意：使用低于5.00 Build 16C1的C Toolkit版本生成的C块必须使用更新的工具包版本重新编译，以便与CPU固件版本5.00或更高版本一起使用。90系列工具包（IC641SWP709/719）与PACSystems不兼容。PACSystems RX7i支持90-70系列扩展机架兼容性90-70扩展机架。PACSystems RX7i CPU和RX7i以太网模块不能在90-70系列机架中运行。90-70系列主机架兼容性90-70主机架不能用于PACSystems RX7i系统。PACSystems RX7i CPU和RX7i以太网模块不能在90-70系列机架中运行。
Requirements of relevant environmental specifications and standards
Please refer to Appendix A of PACSystems RX7i Installation Manual GFK-2223. Battery: memory retention For the selection, installation and estimated life of the battery, see the PACSysts Controller Battery and Energy Pack Manual GFK-2741. Program storage up to 64 MB of battery support RAM 64 MB of non-volatile flash memory User memory power requirements: CRE030 CRE040+5 VDC: 3.2 A nominal+12 VDC: 0.003 A nominal - 12 VDC: 0.003 A nominal+5 VDC: 6.8 A nominal+11 VDC: 003 Ampere rating - 12 VDC: 0.003 Ampere nominal operating temperature: CRE03 CRE0400 0 to 50 ° C (32 ° F to 122 ° F) 0 to 60 ° C (30 ° F to 140 ° F) with fan tray 0 to 60 ° C (32 ° F to 140 ° F), fan tray requires Boolean execution speed, Typical value: CRE030 CRE040 0.069ms per 1000 Boolean contacts/coils 0.024ms per 1000 Boolean contacts/coils Maximum drift of daytime clock accuracy ± 2s/day Operating clock (internal timing) accuracy ± 0.01% Maximum embedded communication RS-232, RS-485, Ethernet interface serial protocol supports Modbus RTU slave station, SNP, serial I/O Ethernet port embedded automatic sensing 10/100 Mbps half duplex/full duplex Ethernet interface VME compatibility system, Designed to support up to 512 VME64 standard ANSI/VITA 1 blocks. The maximum size of a block is 128KB. Memory (For a detailed list of memory regions, see the CPU Reference Manual, GFK-2222.)% I and% Q: 32K bits, For discrete% AI and% AQ: configurable up to 32K% W: configurable up to the maximum available user RAM management memory (combination of symbols and I/O variables): configurable up to 10MB Ethernet interface specification Web based data monitoring Up to 16 Web servers and FTP connections (combination) Ethernet data rate 10Mb/s and 100Mb/s physical interface 10BaseT RJ45 WinLoader support is based on EGD configuration page number 255 time synchronization SNTP selective use EGD is to load EGD configuration from RX7i to the programmer through UDP remote Station Manager is a local Station Manager (RS-232) dedicated RS-232 port Advanced user parameters can be configured
Extension operation
The topic of CPU functional compatibility describes that it is not allowed to use different CPU models for expansion operations. During normal operation, the primary and secondary units in the HSB redundant system must have the same CPU model type. Extension operations with different CPU types are not allowed. The main unit and auxiliary unit with different CPU models can be synchronized in a limited time for system upgrade only. The failure latency of high-performance CPUs in different redundant pairs may need to be increased to allow synchronization. Any model can be in the main unit or auxiliary unit. Programmer version requirements ▪ Proficy * Machine Edition Logic Developer PLC 7.0 SIM5 or higher must be used for the new 6.75 features. ▪ Proficy Machine Edition Logic Developer PLC 6.0 or later must be used for the new features of version 6.00. ▪ Professional Machine Edition Logic Developer 5.8 or higher must be used for the new 5.50 features. ▪ Professional Machine Edition Logic Developer 5.7 or higher must be used for the new features of Version 5.00 ▪ Professional Machine Edition Logic Developer 5.5 Service Pack 2 or later must be used for the new 4.00 features. ▪ Proficy Machine Edition Logic Developer 5.0 Service Pack 3 or later must be used to program the CPU for Modbus/TCP server operations. C Toolkit Compatibility The C Toolkit of PACSystems is distributed with the Professional Machine Edition Logic Developer. Updates can be downloaded from http://www.ge-ip.com/support.LREAL Data type support requires C Toolkit version 5.50 or higher. When PACSystems CPU contains firmware version 5.00 or higher, C Toolkit version 5.00 Build 16C1 or higher is required. Note: C blocks generated with C Toolkit versions earlier than 5.00 Build 16C1 must be recompiled with newer tool kit versions for use with CPU firmware version 5.00 or later. The 90 series kit (IC641SWP709/719) is incompatible with PACSystems. PACSystems RX7i supports 90-70 series expansion rack compatibility 90-70 expansion racks. PACSystems RX7i CPU and RX7i Ethernet module cannot operate in the 90-70 series rack. 90-70 Series Mainframe Compatibility The 90-70 Mainframe cannot be used with PACSystems RX7i systems. PACSystems RX7i CPU and RX7i Ethernet module cannot operate in the 90-70 series rack.
