DSAV111 57350001-CN仓库备货PLC/DCS模块
注释指导
避免可能导致浪费时间和精力的做法或条件。例如，除非编程器将打印机从主控制器模块（MCM）上的RS-232端口断开，否则下载将无法工作。注意：下载到MCM时，请断开打印机的连接。系统参数2-LCD键盘输入和故障信息需要了解系统参数。键盘输入参数要了解2-LCD键盘输入的参数， “制作键盘输入”。故障消息参数要了解读取故障消息的参数，参见EST2安装和维修手册中的“系统维修程序”。简介EST2系统操作手册5安装和操作程序典型程序将以以下格式显示：
Annotation guidance
Avoid practices or conditions that could lead to a waste of time and effort. For example, the download will not work unless the programmer disconnects the printer from the RS-232 port on the main controller module (MCM). Note: Disconnect the printer when downloading to MCM. System parameter 2-LCD keyboard input and fault information need to know system parameters. The keyboard input parameters should know the 2-LCD keyboard input parameters, "Make keyboard input". Fault message parameters To learn the parameters for reading fault messages, refer to the "System Maintenance Procedures" in the EST2 Installation and Maintenance Manual. Introduction EST2 System Operation Manual 5 Installation and Operation Procedures Typical procedures will be displayed in the following format:
要激活操作：
1.在2-LCD上，按激活。2.输入1、2或3级密码。3.按2选择Action。4.输入正在激活的操作的编号（nnnn）。第2步和第4步中的单词“Enter”表示操作员将按2-LCD键盘上的相应数字和Enter键。有关更多信息，请参见第2页的“操作面板设备”。系统操作手册EST2操作操作面板设备摘要2-LCD是EST2中的主要操作员界面。在本章中，您将找到解释其消息和指标的说明。您还可以找到操作其功能开关和消息审查开关的说明。
To activate an action:
1. On the 2-LCD, press Activate. 2. Enter a level 1, 2, or 3 password. 3. Press 2 to select Action. 4. Enter the number of the operation being activated (nnnn). The word "Enter" in steps 2 and 4 indicates that the operator will press the corresponding number and Enter key on the 2-LCD keyboard. For more information, see "Operation Panel Devices" on page 2. The system operation manual EST2 operation panel equipment summary 2-LCD is the main operator interface in the EST2. In this chapter, you will find descriptions that explain their messages and indicators. You can also find instructions for operating its function switch and message review switch.
