您的浏览器版本过低,为保证更佳的浏览体验,请点击更新高版本浏览器

以后再说X

欢迎访问瑞昌明盛自动化设备有限公司网站!

图片名

全国订购热线:
+86 15270269218E-mail:stodcdcs@gmail.com

ABB >>

A-B>>

GE>>

BENTLY>>

48980001-NK DSSR122 PLC/DCS模块

48980001-NK DSSR122 PLC/DCS模块

48980001-NK DSSR122 PLC/DCS模块安装、操作或维护DSSR122 终端装置的预期用户人员应在执行任何安装、操作和维护程序之前阅读本说明。安装需要有处理电子电路经验的工程师或技术人员。使用NTDI02终端装置的人员应具有使用交流/直流电源的经验,并了解应采取的预防措施。还需要了解交响乐系统和电子原理。说明NTDI02终端单元是一块77英寸方形印刷电路板。电路板包含:•两个保险...

  • 功能特性
  • 参数规格
  • 视频
  • 应用案例
  • 下载

48980001-NK DSSR122 PLC/DCS模块

    48980001-NK DSSR122 PLC/DCS模块

    安装、操作或维护
    DSSR122 终端装置的预期用户人员应在执行任何安装、操作和维护程序之前阅读本说明。安装需要有处理电子电路经验的工程师或技术人员。使用NTDI02终端装置的人员应具有使用交流/直流电源的经验,并了解应采取的预防措施。还需要了解交响乐系统和电子原理。说明NTDI02终端单元是一块7×7英寸方形印刷电路板。电路板包含:•两个保险丝。•16个可编程倾角测量。•16个用户可配置跳线。•四个端子排。•一个电缆插座。•两个电源Faston连接器。•一个系统通用Faston连接器。
    Installation, operation or maintenance
    The intended user of the DSSR122 terminal unit should read this instruction before performing any installation, operation, and maintenance procedures. Installation requires engineers or technicians with experience in handling electronic circuits. The personnel using the NTDI02 terminal device shall have experience in using AC/DC power supply and understand the precautions to be taken. You also need to understand the symphony system and electronic principles. Description NTDI02 terminal unit is a 7 × 7-inch square printed circuit board. The circuit board contains: • two fuses. • 16 programmable inclination measurements. • 16 user configurable jumpers. • Four terminal blocks. • One cable socket. • Two power Faston connectors. • A system common Faston connector.
    安装硬件
    Harmony终端装置安装在标准ABB外壳(P-ME-CAB)中。NFTP01现场终端面板用于终端装置安装 。面板连接到EIA标准19英寸机箱中的侧导轨。说明内容本说明包含以下部分:简介提供NTDI02终端装置概述。安装说明物理安装、接线和电缆要求、保险丝要求、双列直插式设置、跳线设置和终端装置的操作。维护包含维护计划。修理和更换说明如何更换终端装置。双列直插式分流器和跳线设置提供特定模块的双列直连式分流器及跳线设置的详细图。
    install hardware
    Harmony terminal units are installed in standard ABB enclosures (P-ME-CAB). NFTP01 field terminal panel is used for terminal device installation. The panel is attached to the side rails in the EIA standard 19 inch chassis. Description This description includes the following parts: Introduction Provides an overview of NTDI02 terminal devices. Installation instructions physical installation, wiring and cable requirements, fuse requirements, DIP settings, jumper settings, and terminal unit operation. Maintenance includes a maintenance plan. Repair and replacement describes how to replace the terminal unit. DIP Diverter and Jumper Setup provides a detailed diagram of the DIP Diverter and Jumper setup for a specific module.

    微信图片_20211117105524_副本.jpg

    1ab538a510fa1c98c670f1a82c3fc9ab.jpg

    1.jpg


    48980001-NK DSSR122 PLC/DCS模块

图片名 客服

在线客服 客服一号