5735099-BA工控模块
按以下步骤进入所需模式
1.断开操作员面板的电源。2.设置模式开关。3.重新连接操作面板的电源。1 24V DC CF卡RS485 RS422 COM 1 10/100 RS232 COM 2扩展忙碌模式1234 ON DIP模式1234 ON DIP模式开关第3节安装18 3BSE043449R501模式开关具有以下功能：（1=ON，0=OFF，“MODE”中的每个字母都有相应的模式开关）表1.模式开关功能说明模式1234说明0000运行模式，正常操作。0010系统还原，重置文件系统和注册表并重新安装系统程序（OPsys_bxxx.CAB）。将操作员面板恢复为出厂设置。注：操作员面板中的系统程序可能已在生产后更新（例如库存或集成商）。如果使用此系统还原功能将操作员面板还原为出厂设置，则系统程序的此更新/更新版本将被删除并替换为生产中使用的版本。但是，可以使用操作员面板配置软件中的更新操作员面板系统程序功能，将操作员面板中的系统程序再次更新为最新版本。0100图像加载模式，允许在操作员面板中升级完整的软件包。注意：使用Image Loader升级时，包括操作员面板中的文件系统在内的所有文件都将被删除。1000 Service Menu（维修菜单）模式下，显示系统程序的维修菜单。允许用户设置IP配置、擦除项目和校准触摸屏。1110自检。xxx1硬复位（强制面板复位）
Enter the desired mode in the following steps
1. Disconnect power from the operator panel. 2. Set the mode switches. 3. Reconnect power to the operator panel. 1 24V DC CF CARD RS485 RS422 COM 1 10/100 RS232 COM 2 EXPANSION BUSY MODE 1234 ON DIP MODE 1234 ON DIP Mode Switches Section 3 Installation 18 3BSE043449R501 The mode switches have the following functions: (1=ON, 0=OFF, each letter in “MODE” has a corresponding Mode Switch) Table 1. Mode Switches With Functional Description MODE 1234 Description 0000 Run mode, normal operation. 0010 System Restore, resets the file system and registry & re-installs the system program (OPsys_bxxx.CAB). Restores the operator panel to factory settings. Note: It is possible that the system program in the operator panel has been updated after production (for example in stock or by an integrator). This update/newer version of the system program will be deleted and replaced with the version that was used in production if the operator panel is restored to the factory settings with this System Restore function. However, the system program in the operator panel can be updated again to the latest version by using the Update Operator Panel System Program function in the configuration software for the operator panels. 0100 Image Load mode, allows upgrading of the complete software package in the operator panel. Note: All files including the file system in the operator panel will be deleted when upgrading with Image Loader. 1000 Service Menu mode, the service menu for the system program is shown. Allows the user to set IP configuration, erase the project and calibrate the touch screen. 1110 Self-test. xxx1 Hard reset ( forces the panel to reset)
