产品内容介绍
43AP-FA42C气动控制器
车站通信概述每个IED都配有一个通信接口，使其能够通过变电站自动化（SA）总线或变电站监控（SM）总线连接到一个或多个变电站级系统或设备。以下通信协议可用：•IEC 61850-8-1通信协议•LON通信协议•SPA或IEC 60870-5-103通信协议•DNP3.0通信协议理论上，多个协议可以组合在同一IED中。IEC 61850-8-1通信协议IED配有用于IEC 61850-9-1站总线通信的单或双光纤以太网后端口（取决于顺序）。IEC 61850-8-1通信也可以从光纤以太网前端端口进行。IEC 61850-9-1协议允许不同供应商的智能电气设备（IED）交换信息并简化系统工程。根据GOOSE，对等通信是该标准的一部分。提供干扰文件上传。串行通信，LON具有ABB车站总线LON的现有车站可通过使用光学LON接口进行扩展。这允许完整的SA功能，包括现有ABB IED和新IED 670之间的点对点消息传递和合作。SPA通信协议为ABB SPA协议提供单个玻璃或塑料端口。这允许扩展简单的变电站自动化系统，但主要用于变电站监控系统SMS。IEC 60870-5-103通信协议为IEC60870-5-103标准提供单个玻璃或塑料端口。这允许设计简单的变电站自动化系统，包括来自不同供应商的设备。提供干扰文件上传
DNP3.0通信协议
一个电气RS485和一个光学以太网端口可用于DNP3.0通信。DNP3.0为与RTU、网关或HMI系统的通信提供了带有主动事件、时间同步和干扰报告的2级通信。多命令和传输当670个IED用于带有LON、SPA或IEC60870-5-103通信协议的变电站自动化系统时，事件和多命令功能块用作与站HMI和网关的垂直通信接口，以及用作水平点对点通信接口（仅限LON）。IEC 62439-3并行冗余协议符合IEC 62439-1第1版和IEC 62433-3第2版的冗余站总线通信可作为670系列IED中的选项提供。IEC 62439-3并行冗余协议是可选数量，可在订购时选择。根据IEC 62439-3，冗余站总线通信使用OEM模块上的端口AB和端口CD。当扩展现有冗余站总线DuoDriver安装时，在订购时选择IEC 62439-3 Edition 1协议。订购带有冗余站总线的新装置时，选择IEC 62439-3第2版协议。IEC 62439-3第1版与IEC 62439-1第2版不兼容。模拟和二进制信号传输到远程端。两个IED之间可以交换三个模拟和八个二进制信号。此功能主要用于线路差动保护。然而，它也可以用于其他产品。一个IED最多可以与4个远程IED通信。
Station communication
Overview Each IED is provided with a communication interface, enabling it to connect to one or many substation level systems or equipment, either on the Substation Automation (SA) bus or Substation Monitoring (SM) bus. Following communication protocols are available: • IEC 61850-8-1 communication protocol • LON communication protocol • SPA or IEC 60870-5-103 communication protocol • DNP3.0 communication protocol Theoretically, several protocols can be combined in the same IED. IEC 61850-8-1 communication protocol The IED is equipped with single or double optical Ethernet rear ports (order dependent) for IEC 61850-8-1 station bus communication. The IEC 61850-8-1 communication is also possible from the optical Ethernet front port. IEC 61850-8-1 protocol allows intelligent electrical devices (IEDs) from different vendors to exchange information and simplifies system engineering. Peer-to-peer communication according to GOOSE is part of the standard. Disturbance files uploading is provided. Serial communication, LON Existing stations with ABB station bus LON can be extended with use of the optical LON interface. This allows full SA functionality including peer-to-peer messaging and cooperation between existing ABB IED's and the new IED 670. SPA communication protocol A single glass or plastic port is provided for the ABB SPA protocol. This allows extensions of simple substation automation systems but the main use is for Substation Monitoring Systems SMS. IEC 60870-5-103 communication protocol A single glass or plastic port is provided for the IEC60870-5-103 standard. This allows design of simple substation automation systems including equipment from different vendors. Disturbance files uploading is provided
DNP3.0 communication protocol
An electrical RS485 and an optical Ethernet port is available for the DNP3.0 communication. DNP3.0 Level 2 communication with unsolicited events, time synchronizing and disturbance reporting is provided for communication to RTUs, Gateways or HMI systems. Multiple command and transmit When 670 IED's are used in Substation Automation systems with LON, SPA or IEC60870-5-103 communication protocols the Event and Multiple Command function blocks are used as the communication interface for vertical communication to station HMI and gateway and as interface for horizontal peerto-peer communication (over LON only). IEC 62439-3 Parallel Redundant Protocol Redundant station bus communication according to IEC 62439-3 Edition 1 and IEC 62439-3 Edition 2 are available as options in 670 series IEDs. IEC 62439-3 parallel redundant protocol is an optional quantity and the selection is made at ordering. Redundant station bus communication according to IEC 62439-3 uses both port AB and port CD on the OEM module. Select IEC 62439-3 Edition 1 protocol at the time of ordering when an existing redundant station bus DuoDriver installation is extended. Select IEC 62439-3 Edition 2 protocol at the time of ordering for new installations with redundant station bus. IEC 62439-3 Edition 1 is NOT compatible with IEC 62439-3 Edition 2.Analog and binary signal transfer to remote end Three analog and eight binary signals can be exchanged between two IEDs. This functionality is mainly used for the line differential protection. However it can be used in other products as well. An IED can communicate with up to 4 remote IEDs.
产品优势
1：国外专业的供货渠道，具有价格优势
2：产品质量保证，让您售后无忧
3：全国快递包邮
4：一对一服务
公司主营范围简介
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件、欧美进口模块。
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
