产品内容介绍
1336-CONV-SP6A扩展数字电机
认证和标准
简介施耐德电气将该产品提交给第三方上市机构进行独立测试和鉴定。这些机构已证明该产品符合以下标准。机构认证HMIGTO的制造符合： 工业控制设备的标准UL 508和CSA C22.2 no142 用于I类2类危险场所的电气设备的标准ANSI/ISA-12.12.01和CSA C22.2 no213注： 适用于2级污染环境。 适用于1型、4X型（仅限室内使用）或13型外壳的平面。 24 Vdc输入面板必须与2级电源一起使用。 适用于I级2类A、B、C和D组危险场所。 GOST认证。请参阅产品标记。 技术检验协会的ATEX认证。请参阅产品标签。 商船队规则。（Harmony GTOxx5.除外）产品设计符合商船队规则。请参阅施耐德电气公司网站，了解商船规则安装指南。 标准EN1672-2（Harmony GTOxx5）。 FDA法规21 CFR 177（Harmony GTOxx5）。有关安装指南，请参阅施耐德电气网站。有关详细信息，请联系您当地的经销商或查看产品上的目录和标记。
有害物质
HMIGTO是一种用于工厂系统的设备。在系统中使用HMIGTO时，系统应符合以下有关安装环境和处理的标准： WEEE，指令2002/96/EC RoHS，指令2011/65/EU RoHS中国，标准SJ/T 11363-2006 CE标记本产品符合以下CE标签应用指令的要求： 2006/95/EC低压指令 2004/108/EC EMC指令此一致性基于符合EN61000-6-4、EN61000-6-2爆炸可能性 验证电源、输入和输出（I/O）接线是否符合I级2类接线方法。 替换任何部件可能会影响I类2类的适用性。 除非电源已关闭或该区域已知无害，否则不要连接或断开设备。 在打开电源之前，牢牢锁定外部连接的单元和每个接口。 除非该区域已知无害，否则请勿使用、连接或断开USB电缆。 当电路带电时，或者除非已知该区域没有可燃浓度，否则不要断开连接。 潜在的静电充电危险。打开电源前，用湿布擦拭端子的前面板。不遵守这些说明将导致死亡或重伤。
Certifications and Standards
Introduction Schneider Electric submitted this product for independent testing and qualification by third-party listing agencies. These agencies have certified this product as meeting the following standards. Agency Certifications The HMIGTO is manufactured in accordance with: Standard UL 508 and CSA C22.2 no142 for Industrial Control Equipment Standard ANSI/ISA - 12.12.01 and CSA C22.2 no213 for Electrical Equipment for Use in Class I, Division 2 Hazardous Locations NOTE: For use in Pollution Degree 2 environments. For use on a flat surface of a Type 1, Type 4X (Indoor Use Only) or Type 13 Enclosure. 24 Vdc input panel must be used with a Class 2 power supply. Suitable for use in Class I, Division 2 Groups A, B, C, and D Hazardous Locations. GOST certification. Refer to product markings. ATEX certification by Technical Inspection Association. Refer to product label. Merchant Navy rules. (Except Harmony GTOxxx5.) Products are designed to comply with Merchant Navy rules. Refer to the Schneider Electric Web site for Merchant Navy rules installation guidelines. Standard EN1672-2 (Harmony GTOxxx5). FDA regulation 21 CFR 177 (Harmony GTOxxx5). Refer to the Schneider Electric web site for installation guidelines. For detailed information, contact your local distributor or see the catalog & marking on the product.
Hazardous Substances
The HMIGTO is a device for use in factory systems. When using the HMIGTO in a system, the system should comply with the following standards with regard to the installation environment and handling: WEEE, Directive 2002/96/EC RoHS, Directive 2011/65/EU RoHS China, Standard SJ/T 11363-2006 CE Markings This product conforms to the requirements of the following Directives for applying the CE label: 2006/95/EC Low Voltage Directive 2004/108/EC EMC Directive This conformity is based on compliance with EN61000-6-4, EN61000-6-2
POTENTIAL FOR EXPLOSION Verify that the power, input, and output (I/O) wiring are in accordance with Class I, Division 2 wiring methods. Substitution of any component may impair suitability for Class I, Division 2. Do not connect or disconnect equipment unless power has been switched off or the area is known to be non-hazardous. Securely lock externally connected units and each interface before turning on the power supply. Do not use, connect, or disconnect USB cable unless area is known to be non-hazardous. Do not disconnect while circuit is live or unless the area is known to be free of ignitable concentrations. Potential electrostatic charging hazard. Wipe the front panel of the terminal with a damp cloth before turning ON. Failure to follow these instructions will result in death or serious injury.
公司主营产品图展示
产品优势
1：国外专业的供货渠道，具有价格优势
2：产品质量保证，让您售后无忧
3：全国快递包邮
4：一对一服务
公司主营范围简介
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件、欧美进口模块。
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
