公司主营产品图展示
产品优势
1：国外专业的供货渠道，具有价格优势
2：产品质量保证，让您售后无忧
3：全国快递包邮
4：一对一服务
产品详情介绍
88TV01E数字量输出模块
说明注释：
1.一米系统不使用延长电缆。
2.前置器传感器默认由工厂校准为AISI 4140钢。校准至其他目标材料可根据要求提供。3.咨询Bently Nevada*应用说明，使用涡流接近时的注意事项超速保护应用探头，当考虑该转速表传感器系统或超速测量。4.3300 XL 8 mm组件均为电气和可与非XL 3300 5 mm进行物理互换和8 mm组件。尽管3300 XL前置器传感器不同于前身，其设计适合于相同的4孔与4孔一起使用时的安装模式安装底座，并将安装在同一个支座内空间规格（最小允许值时观察电缆弯曲半径）。
5.混合XL和非XL 3300系列5 mm和8 mm系统组件将系统性能限制为非XL 3300 5 mm和8 mm的规格传感器系统。
6.3300系列5 mm探针（参考规范和订购信息（p/n 141605-01）使用较小的物理包装，但不会减少侧视间隙或叶尖间距与8 mm探头相比，要求更高。它是物理（非电气）约束时使用禁止使用8mm探头。当您的应用程序需要窄侧视图探针，请使用3300 NSv*接近传感器系统（参考规格和订购信息p/n 147385-01).
7.8毫米探针提供了更厚的封装成型PPS塑料探针头中的探针线圈。这导致探头更加坚固。
较大的直径探头主体的稳健的案例。
我们建议您使用8毫米尽可能探测以提供最佳鲁棒性反对身体虐待。
8.每个3300 XL延长电缆包括硅胶带可以用它代替连接器保护器。我们不建议使用硅胶胶带将探头暴露在延长电缆连接中汽轮机油.规范除非另有说明，否则以下规范用于3300 XL 8 mm前置器传感器，加长件+18之间的电缆和8 mm探针C和+27C(+64 F至+80F） ，带-24 Vdc电源，10kΩ负载、AISI 4140钢靶和探针间隙为1.27 mm（50 mils）。表演特性适用于仅由3300 XL 8 mm组件。系统精度互换性规范不适用于校准到任何目标的传感器系统除了我们的AISI 4140钢靶标。规格除非另有说明，否则以下规范用于3300 XL 8 mm前置器传感器，加长件+18之间的电缆和8 mm探针C和+27C(+64 F至+80F） ，带-24 Vdc电源，10kΩ负载、AISI 4140钢靶和探针间隙为1.27 mm（50 mils）。表演特性适用于仅由3300 XL 8 mm组件。系统精度互换性规范不适用于校准到任何目标的传感器系统而不是我们的AISI 4140钢靶。
Description Notes:
1. One-metre systems do not use an extension cable.
2. Proximitor sensors are supplied by default from the
factory calibrated to AISI 4140 steel. Calibration to
other target materials is available upon request.
3. Consult Bently Nevada* Applications Note,
Considerations when using Eddy Current Proximity
Probes for Overspeed Protection Applications, when
considering this transducer system for tachometer or
overspeed measurements.
4. 3300 XL 8 mm components are both electrically and
physically interchangeable with non-XL 3300 5 mm
and 8 mm components. Although the packaging of
the 3300 XL Proximitor Sensor differs from its
predecessor, its design fits in the same 4-hole
mounting pattern when used with the 4-hole
mounting base, and will fit within the same mounting
space specifications (when minimum permissible
cable bend radius is observed).
5. Mixing XL and non-XL 3300-series 5 mm and 8 mm
system components limits system performance to the
specifications for the non-XL 3300 5 mm and 8 mm
Transducer System.
6. The 3300-series 5 mm probe (refer to Specifications
and Ordering Information p/n 141605-01) uses
smaller physical packaging, but does not reduce the
side view clearances or tip-to-tip spacing
requirements as compared to an 8 mm probe. It is
used when physical (not electrical) constraints
preclude the use of an 8 mm probe. When your
application requires narrow side view probes, use the
3300 NSv* Proximity Transducer System (refer to
Specifications and Ordering Information p/n 147385-
01).
7. 8 mm probes provide a thicker encapsulation of the
probe coil in the molded PPS plastic probe tip. This
results in a more rugged probe. The larger diameter
of the probe body also provides a stronger, more
robust case. We recommend that you use 8 mm
probes when possible to provide optimal robustness
against physical abuse.
8. Each 3300 XL extension cable includes silicone tape
that you can use instead of connector protectors. We
do not recommend silicone tape for applications that
will expose the probe-to-extension cable connection
to turbine oil.Specifications
Unless otherwise noted, the following specifications
are for a 3300 XL 8 mm Proximitor Sensor, extension
cable and 8 mm probe between +18 C and +27 C
(+64 F to +80 F), with a -24 Vdc power supply, a 10
kΩ load, an AISI 4140 steel target, and a probe
gapped at 1.27 mm (50 mils). Performance
characteristics apply to systems that consist solely
of 3300 XL 8 mm components. The system accuracy
and interchangeability specifications do not apply to
transducer systems that are calibrated to any target
other than our AISI 4140 steel target.
