公司主营产品图展示
产品优势
1：国外专业的供货渠道，具有价格优势
2：产品质量保证，让您售后无忧
3：全国快递包邮
产品详情介绍
DATX130数字量工控卡件
Advme7509是一个使用PowerPC750FX的单槽6U VME板加工机该板可用作系统控制器，以满足高性能和系统要求。前面板包括2ch的10/100BASE-TX以太网端口和4ch RS232串行端口。
各种存储器，包括SDRAM（高达512MB）、CompactFlash、闪存和闪存，可提供闪存、SRAM和EEPROM。外部VME总线可通过车载“鸣人II”PCI-VME桥访问。
•单槽6U VME PowerPC处理器板
•利用IBM PowerPC750FX（600MHz）CPU，配备32K字节一级缓存和512k字节二级缓存
•Marvell的Discovery I（GT-64260）系统控制器
•高达512MB的双端口SDRAM（133.3MHz，EC/ECC），可从VME总线
•8通道DMA控制器，用于主存储器和内部PCI总线
•2信道10/100Base TX以太网
•4通道RS232C串行端口和4通道RJ-45端口
•512k字节启动ROM闪存，可容纳Advantet T4th启动装载
•512k字节SRAM和实时时钟，由锂电池备份
•小型闪存插座
•256字节串行EEPROM（非易失性存储器）
•单个64位/66MHz PMC插槽
•通过Advanet的“NARUTO II”PCI-VME桥与VME总线接口
•可作为VME主设备或从设备运行
•需要来自VME总线的单个5V电源。TSDiag+是一种工具，允许您使用Microsoft CE或通过网络使用Windows XP操作系统的计算机。
由操作系统和客户端/服务器组成的每个组合都是可能的。用户可以查看显示器的内容，并与正在运行的软件进行交互在设备上，无论软件制造商如何。在这种情况下，您可以执行与直接操作触摸屏时相同的操作。你可以也可以使用访问设备的键盘-PC或其他操作设备-输入数据，而无需通过您正在访问的设备的输入面板进行替代路由。
该选项提供了额外的功能增强，允许您将文件传输到设备中可以写入的任何文件夹。
因此，您可以使用TSDiag+从一个计算机连接到多个操作设备或检查当前运行的应用程序的当前状态。
2.1一般操作条件
该软件可在Windows CE 5.0和6.0操作系统的设备上执行。该客户端也可用于使用x86架构的PC。为了在客户端和服务器之间建立通信，服务器并且客户端必须在网络内的同一子网中。
操作设备所需的内存量非常低-服务器和客户端的组合内存需求小于500 KB。此外还有日志文件所需的内存。但是，其大小由设置决定。PC的客户端需要少于50 KB的硬盘。
Advme7509 is a single-slot 6U VME board utilizing a PowerPC750FX
processor. The board can be used as a system controller to meet high
performance system requirements. The front panel includes 2ch of
10/100BASE-TX Ethernet ports and 4ch RS232 serial ports.
A variety of memory, including SDRAM (up to 512MB), CompactFlash,
FlashROM, SRAM, and EEPROM are available. The external VME bus
is accessible via the on-board “NARUTO II” PCI-VME bridge.
• Single-slot 6U VME PowerPC processor board
• Utilizing IBM PowerPC750FX (600MHz) CPU with 32K bytes L1 cache & 512k
bytes L2 cache
• Marvell’s Discovery I (GT-64260) system controller
• Up to 512MB of dual-ported SDRAM (133.3MHz, EC/ECC) accessible from
the VME bus
• 8-ch DMA controller for high speed transfers between main memory and the
internal PCI bus
• 2-ch 10/100Base-TX Ethernet
• 4-ch RS232C serial ports and 4-ch RJ-45 ports
• 512k bytes Boot ROM FLASH memory accommodating an Advanet T4th boot
loader
• 512k bytes SRAM and real time clock, backed up with a lithium battery
• Socket for CompactFlash memory
• 256 bytes serial EEPROM (non-volatile memory)
• A single 64-bit / 66MHz PMC slot
• Interface with the VME bus sing Advanet’s “NARUTO II” PCI-VME bridge
• Can operate as either a VME master or slave
• Requires a single 5V power supply from the VME bus TSDiag+ is a tool that allows you to access each Sütron operating device using the
Microsoft CE or a computer using the Windows XP operating system via the network.
Each combination consisting of operating system and client / server is possible.
The user can view the content of the display and interact with the software running
on the device, regardless of the software manufacturer. In this case, you can perform
the same actions that you can when operating the touch screen directly. You can
also use the keyboard of the accessing device - a PC or another operating device -
to enter data without the need for an alternative routing via the input panel of the device that you are accessing.
Additional functional enhancement is provided by the option that allows you to transfer files to any folder in the device that can be written to.
As a result, you can use TSDiag+ to transfer updated project files or drivers from one
computer to multiple operating devices or to check the current status of the application currently running.
2.1 General Operating Conditions
The software is executable on devices with Windows CE 5.0 and 6.0 operating system. The client is also available for PCs using the x86 architecture.
To enable communication between client and server to be established, the server
and the client must be in the same subnet within the network.
The amount of memory required on the operating devices is very low - the server and
client have a combined memory requirement of less than 500 KB. Added to this is
the memory required by the log file. However, its size is determined by the settings.The client for the PC requires less than 50 KB on the hard disk.
