公司主营产品图展示
产品优势
1：国外专业的供货渠道，具有价格优势
2：产品质量保证，让您售后无忧
3：全国快递包邮
产品详情介绍
FPR3346501R1012模拟远程配件
选项为是（默认）和否。选择是将导致系统清除扩展系统配置数据（ESCD）区域，将重置即插即用将新设备添加到系统或BIOS升级。清除数据后，此字段自动切换为否。此ESCD每次BIOS更改、保存和退出，因此，如果要清除数据而不更改其他BIOS设置。大型磁盘有1024多个柱面、16个磁头或63个扇区每个轨道。如果您的系统基于DOS（DOS或Windows OS），请选择DOS（默认）；
如果您有其他操作系统（如Unix、Novell Netware等），请选择“其他”。如果你是如果安装新软件或驱动器失败，请更改此字段选择，然后尝试重新安装软件。不同的系统需要不同的驱动器几何形状表示。此字段确定本地总线IDE适配器的配置。选项有：两者（主和次，默认）、禁用、主和次。
摘要屏幕：此字段确定通电时是否显示系统配置。如果字段启用时，计算机将在系统信息屏幕上显示并暂停。另一个选项被禁用（默认）。
启动时间诊断屏幕此字段确定是否显示公司徽标或诊断屏幕通电时。选项已启用（无徽标）或禁用（显示徽标诊断屏幕的默认值）。这些字段控制COM端口（A或B）的配置。选择是自动的
（系统设置端口，默认）、禁用（端口关闭）和启用（用户配置端口）。如果操作系统不允许手动设置端口，（操作系统控制）将显示，这将是一个只读字段。
基本I/O地址/IRQ：
当设置为时，此字段将显示在COM A或COM B字段下启用。设置为3F8/IRQ 4（COM A的默认设置）、2F8/IRQ 3（COM的默认设置B） 、3E8/IRQ 4和2E8/IRQ 3。如果将两个端口配置为共享相同的基本I/O地址，黄色星号将出现在COM A和COM B字段旁边，表示冲突并行端口此字段控制并行端口（LPT1）的配置。选择是自动的系统设置端口（默认）、禁用（端口关闭）和启用（用户配置端口）。如果操作系统不允许手动设置端口，（操作系统控制）将显示，这将是一个只读字段。此字段控制并行端口的模式。选项为双向（默认，双向ECP）、EPP、ECP和仅输出。基本I/O地址如果并行端口设置为Enabled（启用）且Mode（模式）设置为双向（默认）、ECP或仅输出。选项为378（默认）、278和3BC公司。
中断如果“并行端口”设置为“启用”，则会显示此字段。选项为IRQ 7（默认）和IRQ 5。
DMA信道如果并行端口设置为Enabled（启用）且模式设置为ECP（ECP），则会显示此字段。选项为DMA 1（默认）和DMA 3。软盘控制器此字段控制传统软盘控制器的配置。选择是Enabled（启用）（默认）和Disabled（禁用）（关闭所有板载旧磁盘驱动器）。基本I/O地址此字段控制磁盘控制器的基本I/O地址。选项有：主要（默认）和次要。
The options are Yes (default) and No. Choosing Yes will cause the system to clear the
Extended System Configuration Data (ESCD) area, which will reset the Plug & Play
configuration data table when new devices are added to the system or when the BIOS is
upgraded. This field is automatically toggled to No after the data is cleared. This ESCD
clearing function is automatically performed every time the BIOS is changed, saved, and
exited, so you will only need to use this function if you want to clear the data without
changing the other BIOS settings. A large disk has more than 1024 cylinders, more than 16 heads, or more than 63 sectors
per track. Select DOS (default) if your system is DOS-based (DOS or Windows OS);
select Other if you have another OS (such as a Unix, Novell Netware, etc.). If you are
installing new software and the drive fails, change this field selection, and try to reinstall
the software. Different systems require different representations of drive geometries. This field determines the configuration of the local bus IDE adapter. The options are
Both (primary and secondary, default), Disabled, Primary, and Secondary.
Summary screen This field determines whether the system configuration is displayed on powerup. If this
field is Enabled, the computer will display and pause at the system information screen.
The other option is Disabled (default).
Boot-time Diagnostic
Screen
This field determines whether the company logo or the diagnostics screen is displayed
on powerup. The choices are Enabled (no logo) or Disabled (the logo is shown instead
of the diagnostics screen, default). These fields control the configuration of the COM ports (A or B). The choices are Auto
(the system sets up the port, default), Disabled (port turned off), and Enabled (the user
configures the port). If the OS disallows manual setup of the port, (OS Controlled) will be
displayed and this will be a read-only field.
Base I/O address/IRQ This field will appear under either of the COM A or COM B fields when they are set to
Enabled. The settings are 3F8/IRQ 4 (default for COM A), 2F8/IRQ 3 (default for COM
B), 3E8/IRQ 4, and 2E8/IRQ 3. If you configure both ports to share the same base I/O
address, yellow asterisks will appear beside the COM A and COM B fields, signifying a
conflict.
Parallel port This field controls the configuration of the parallel port (LPT1). The choices are Auto (the
system sets up the port, default), Disabled (port turned off), and Enabled (the user
configures the port). If the OS disallows manual setup of the port, (OS Controlled) will be
displayed and this will be a read-only field. This field controls the mode for the parallel port. The choices are Bi-directional (default,
two-way ECP), EPP, ECP, and Output only.
Base I/O address This field appears if the Parallel port setting is Enabled and the Mode setting is
Bi-directional (default), ECP, or Output only. The choices are 378 (default), 278, and
3BC.
Interrupt This field appears if the Parallel port setting is Enabled. The choices are IRQ 7 (default)
and IRQ 5.
DMA channel This field appears if the Parallel port setting is Enabled and the Mode setting is ECP.
The choices are DMA 1 (default) and DMA 3.
Floppy disk controller This field controls the configuration of the legacy diskette controller. The choices are
Enabled (default) and Disabled (turns off all on-board legacy diskette drives).
Base I/O address This field controls the base I/O address for the diskette controller. The options are
Primary (default) and Secondary.
