BENTLY 3500/44M,监测器模块
本手册包含安装、操作和维护加藤工程KCR 760电压调节器。
在安装、操作和使用本手册之前，请完整阅读本手册维护您的调节器。
安全说明为了防止受伤或设备损坏，所有相关人员所述设备的安装、操作和维护在本手册中，必须是quali 并告知当前的安全性管理他或她的工作的标准。
而常识是防止受伤或设备损坏不能完全取消 不需要任何手册（也不需要任何部件设备），以下段落 ne警告、注意事项和
本手册中使用的注释：警告：警告标识安装、操作或维护程序、惯例、条件或声明，如果不严格遵守，可能导致人员死亡或重伤。
注意事项：注意事项识别安装、操作或维护程序、惯例、条件或声明，如果不严格遵守，可能导致设备的破坏或损坏，或严重系统运行受损。
备注：备注突出显示安装、操作或维护程序、条件或陈述，是必要的或有用的，但不是警告和注意事项所示的已知危险性质。
功能、选项和规格 阳离子
概述
KCR 760电压调节器设计用于无刷运行同步发电机。电压调节器控制发电机电压通过调节向励磁机提供的电流量 埃尔德。
KCR 760电压调节器由变压器、晶体管和/或变压器组成，硅二极管，硅控整流二极管 ers（SCR）、集成电路，电阻器和电容器。调节器相对不受以下因素的影响：湿度、温度、振动或冲击，且不会因活动部件。固态 埃尔德 灰化组件而不是继电器用于 埃尔德 灰化和低频电路，消除接触电弧或接触故障的可能性。
Foreword This manual contains instructions for installing, operating and maintaining Kato Engineering KCR 760 voltage regulators. Please read this manual in its entirety before installing, operating, and servicing your regulator. Safety instructions In order to prevent injury or equipment damage, everyone involved in installation, operating and maintenance of the equipment described in this manual must be quali ed and informed of the current safety standards that govern his or her work. While common-sense prevention of injury or equipment damage cannot be completely de ned by any manual (nor built into any piece of equipment), the following paragraphs de ne warnings, cautions, and notes as they are used in this manual: Warning: Warnings identify an installation, operating or maintenance procedure, practice, condition, or statement that, if not strictly followed, could result in death or serious injury to personnel. Caution: Cautions identify an installation, operating or maintenance procedure, practice, condition, or statement that, if not strictly followed, could result in destruction of or damage to equipment or serious impairment of system operation. Note: Notes highlight an installation, operating or maintenance procedure, condition, or statement and are essential or helpful but are not of known hazardous nature as indicated by warnings and cautions. Features options and speci cations Overview The KCR 760 voltage regulator is designed for operation with brushless synchronous generators. The voltage regulator controls generator voltage by regulating the amount of current it supplies the exciter eld. The KCR 760 voltage regulator consists of transformers, transistors, silicon diodes, silicon controlled recti ers (SCRs), integrated circuits, resistors, and capacitors. The regulatorsis relatively unaffected by humidity, temperature, vibration, or shock and is not subject to wear from moving parts. Solid-state eld ashing components rather than relays are used in the eld ashing and underfrequency circuits, eliminating the possibility of contact arcing or contact failure.
