主营产品
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
3BHE028959R0101数控模块
高电压！高漏电流！生命危险、人身伤害危险电击！
⇒ 在接通电气装置电源之前，所有外壳和电机必须永久接地
根据连接图。这适用于即使是短暂的测试。
⇒ 漏电流超过3.5mA。因此电气设备和装置必须始终牢固连接到供电网络。
⇒ 使用至少10 mm²交叉的铜导线该保护的整个过程的截面联系
⇒ 在启动之前，即使是短暂的测试，始终连接保护导体或接地线。
外壳上可能会出现高电压水平可能导致严重电击和人身伤害损伤
欧洲国家：EN 50178/1998，第5.3.2.1节。美国：参见国家电气规范（NEC），国家
电气制造商协会（NEMA）和当地建筑规范。该设备的用户必须维护：
随时遵守上述说明。保护性低电压（PELV）保护电击
电压在5至50伏之间的所有连接和端子INDRAMAT产品为保护性低压产品，其设计符合
接触安全标准如下：
•国际：IEC 364-4-411.1.5
•欧盟国家：见EN 50178/1998，第5.2.8.1节。警告
错误导致的高电压连接！严重电气危险，危及生命电击和严重身体伤害！
⇒ 仅设备、电气部件和电缆保护性低压型（PELV=保护型超低电压）0至50伏的端子和夹具。
⇒ 仅安全隔离电压和电路可以连接。实现安全隔离，用于例如，使用隔离变压器、光电耦合器或电池操作时。
High electrical voltage! High leakage current!
Danger to life, danger of injury and bodily harm
from electrical shock!
⇒ Before switching on power for electrical units, all
housings and motors must be permanently grounded
according to the connection diagram. This applies
even for brief tests.
⇒ Leakage current exceeds 3.5 mA. Therefore the
electrical equipment and units must always be firmly
connected to the supply network.
⇒ Use a copper conductor with at least 10 mm² cross
section over its entire course for this protective
connection!
⇒ Prior to startups, even for brief tests, always connect
the protective conductor or connect with ground wire.
High voltage levels can occur on the housing that
could lead to severe electrical shock and personal
injury.
European countries: EN 50178/1998, section 5.3.2.1.
USA: See National Electrical Codes (NEC), National
Electrical Manufacturers Association (NEMA), and local
building codes. The user of this equipment must maintain
the above noted instructions at all times. Protection by protective low voltage (PELV) against
electrical shock
All connections and terminals with voltages between 5 and 50 Volts on
INDRAMAT products are protective low voltages designed in accordance
with the following standards on contact safety:
• International: IEC 364-4-411.1.5
• EU countries: see EN 50178/1998, section 5.2.8.1.
WARNING
High electrical voltage due to wrong
connections! Danger to life, severe electrical
shock and severe bodily injury!
⇒ Only equipment, electrical components and cables of
the protective low voltage type (PELV = Protective
Extra Low Voltage) may be connected to all
terminals and clamps with 0 to 50 Volts.
⇒ Only safely isolated voltages and electrical circuits
may be connected. Safe isolation is achieved, for
example, with an isolating transformer, an optoelectronic coupler or when battery-operated.
