主营产品
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
FBM211模拟量输出模块
使用和应用领域力士乐Indramat制造的驱动控制器设计用于控制：电机并监控其运行。
电机的控制和监控可能需要额外的传感器和演员。
注：驱动控制器只能与附件一起使用以及本文件中规定的部件。如果组件没有已明确命名，则可能未安装或
有联系的。这同样适用于电缆和线路。仅允许在指定配置和使用软件和固件的组件组合
如相关功能描述中所述。
每个驱动控制器必须在启动前进行编程，使马达可以执行应用的特定功能。
ECODRIVE03系列的驱动器控制器设计用于：单轴或多轴驱动和控制应用。
为确保特定应用，驱动器控制器可用具有不同的驱动功率和不同的接口。
属于ECODRIVE03的驱动控制器的典型应用家庭成员包括：
•搬运和安装系统，
•包装和食品机械，
•印刷和纸张加工机器，以及机床。
驱动控制器可以仅在组件下操作，此处所述的安装和环境条件（温度，保护系统、湿度、EMC要求等）和指定的位置。
2.2不当使用使用上述参考区域之外的驱动器控制器
应用或在除中所述之外的操作条件下文件和规定的技术数据被定义为“不适当使用”。
在以下情况下，不得使用驱动器控制器：
它们受到不符合上述要求的操作条件的影响
规定的环境条件。这包括例如操作
在极端温度波动的情况下，或极高的最高温度，或者
•力士乐因德拉马特并未为此专门发布
意图请注意一般安全中概述的规范说明书
Areas of use and application
Drive controllers made by Rexroth Indramat are designed to control
electrical motors and monitor their operation.
Control and monitoring of the motors may require additional sensors and
actors.
Note: The drive controllers may only be used with the accessories
and parts specified in this document. If a component has not
been specifically named, then it may not be either mounted or
connected. The same applies to cables and lines.
Operation is only permitted in the specified configurations and
combinations of components using the software and firmware
as specified in the relevant function descriptions.
Every drive controller has to be programmed before starting it up, making
it possible for the motor to execute the specific functions of an application.
The drive controllers of the ECODRIVE03 family are designed for use in
single or multiple-axis drive and control applications.
To ensure an application-specific use, the drive controllers are available
with differing drive power and different interfaces.
Typical applications of drive controllers belonging to the ECODRIVE03
family are:
• handling and mounting systems,
• packaging and foodstuff machines,
• printing and paper processing machines and
• machine tools.
The drive controllers may only be operated under the assembly,
installation and ambient conditions as described here (temperature,
system of protection, humidity, EMC requirements, etc.) and in the
position specified.
2.2 Inappropriate use
Using the drive controllers outside of the above-referenced areas of
application or under operating conditions other than described in the
document and the technical data specified is defined as “inappropriate
use".
Drive controllers may not be used if
• they are subject to operating conditions that do not meet the above
specified ambient conditions. This includes, for example, operation
under water, in the case of extreme temperature fluctuations or
extremely high maximum temperatures or if
• Rexroth Indramat has not specifically released them for that intended
purpose. Please note the specifications outlined in the general safety
instructions!
