AMAT Applied Materials 0100-35346继电器模块 PDF资料
1.产 品 资 料 介 绍：
产品概述
AMAT Applied Materials 0100-35346 继电器模块是一款工业级控制模块，主要用于半导体制造设备中实现电气隔离、信号切换和负载控制。它可在控制系统与执行器之间提供安全可靠的电气隔离，使高电压/高电流信号可以通过低压控制信号安全触发，保证设备运行的安全性和稳定性。
技术参数（典型特征，具体参数以实物或官方资料为准）
产品类型：继电器模块（Relay Module）
主要功能：
信号切换与隔离
控制高电压/大电流负载
支持多路输出
接口类型：模块化插槽或螺丝端子接口，兼容 AMAT 系统
电气特性：
工作电压范围：根据模块设计可为 24V DC、110V AC 或其他工业电压
额定电流：根据模块设计，一般为 5A-10A
触点类型：常开（NO）、常闭（NC）或组合型
机械特性：工业级 PCB 或 DIN 导轨安装，适应工厂环境
应用场景
半导体设备控制：用于控制泵、阀门、电机等执行器，实现自动化操作。
信号隔离与安全：将控制系统低压信号与高压负载电路隔离，防止干扰和损坏。
系统扩展：支持多路控制信号输出，便于设备功能扩展。
设备保护：通过继电器的切换功能，实现过流、过压等保护动作。
产品优势
可靠性高：工业级设计，适应半导体工厂长时间运行环境。
电气隔离：保证控制系统与负载电路安全隔离，降低设备故障风险。
模块化设计：便于快速安装、替换与维护。
兼容性强：与 AMAT 原厂控制和信号模块深度匹配，保证系统稳定性。
AMAT Applied Materials 0100-35346继电器模块 英文介绍
Product Overview
AMAT Applied Materials 0100-35346 Relay Module is an industrial grade control module mainly used for electrical isolation, signal switching, and load control in semiconductor manufacturing equipment. It can provide safe and reliable electrical isolation between the control system and the actuator, allowing high voltage/high current signals to be safely triggered through low voltage control signals, ensuring the safety and stability of equipment operation.
Technical parameters (typical features, specific parameters are subject to physical or official information)
Product type: Relay Module
Main functions:
Signal switching and isolation
Control high voltage/high current loads
Multi-speaker output
Interface type: Modular slot or screw terminal interface, compatible with AMAT system
Electrical characteristics:
Working voltage range: Depending on the module design, it can be 24V DC, 110V AC, or other industrial voltages
Rated current: According to the module design, it is generally 5A-10A
Contact type: normally open (NO), normally closed (NC) or combination type
Mechanical characteristics: Industrial grade PCB or DIN rail installation, suitable for factory environment
Application scenarios
Semiconductor equipment control: used to control actuators such as pumps, valves, motors, etc., to achieve automated operations.
Signal isolation and safety: Isolate the low-voltage signal of the control system from the high-voltage load circuit to prevent interference and damage.
System Expansion: Supports multiple control signal outputs for easy device function expansion.
Equipment protection: Through the switching function of relays, overcurrent, overvoltage and other protection actions are achieved.
Product advantages
High reliability: Industrial grade design, suitable for long-term operating environments in semiconductor factories.
Electrical isolation: Ensure safe isolation between the control system and the load circuit, reducing the risk of equipment failure.
Modular design: easy to install, replace, and maintain quickly.
Strong compatibility: Deeply matched with AMAT's original control and signal modules to ensure system stability.
AMAT Applied Materials 0100-35346继电器模块 产品展示
3.其他产品
ABB RDCU-12C 3AUA0000036521控制板
ABB RPBA-01 C2500843通信模块
ABB RDCO-03 3AFE64379275可编程式控制器
4.其他英文产品
YOKOGAWA CP451-50 CPU module
DSSR122 48990001-NK Redundant module
EST0240Z05WBX00 Touch screen
| 6ES5752-0LA62 | CACR-SR05BE12G-E | 61-0610-01 |
| 6ES5752-0LA12 | CACR-SR20SF1AFB | 60-0292-00 |
| 6ES5752-0AA23 | CACR-JUM25D2A | EPC-9-166MHZ |
| 6ES5750-2AB21 | CACR-TS555Z1SR-Y9 | C2SBM-RSYS-PL2 |
| 6ES5736-6CB00 | CACR-UP20AAA | 459826-002 |
| 6ES5736-2CF00 | CACR-UP6AAC | 002-1-23158-10 |
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs
