GIDINGS&LEWIS  M.1300.4145输出模块 PDF资料 

1.产 品 资 料 介 绍：

GIDDINGS&LEWIS M.1300.4145 输出模块

一、产品概述

GIDDINGS&LEWIS M.1300.4145 输出模块是一款工业自动化系统中的信号与控制接口单元，用于将控制器发出的逻辑指令转换为可执行的电气信号，驱动外部负载（如继电器、接触器、指示灯、执行器等）。该模块具有响应速度快、可靠性高、抗干扰能力强等特点，常用于数控系统、自动化生产线及机电一体化设备。

二、技术参数（典型指标，具体以实际版本为准）

• 模块类型：数字量输出模块

• 通道数量：多通道（常见为8或16路）

• 输出形式：晶体管/继电器输出（根据配置）

• 电压等级：DC 24V 或 AC 110/220V 适配

• 输出电流：单通道 0.5A–2A（典型值）

• 隔离方式：光耦隔离，提升抗干扰能力

• 响应时间：<1ms

• 安装方式：插入式模块化设计，便于更换与扩展

• 接口：与GIDDINGS&LEWIS 主控系统总线兼容

三、应用场景

1. 数控机床控制

• 控制主轴启停、冷却液泵、工作灯、报警器等外围设备。

2. 自动化产线

• 实现生产线中输送带、执行气缸、机械臂末端执行器的控制。

3. 过程控制系统

• 用于阀门、电磁铁、电机的开关量驱动。

4. 机器人系统

• 控制末端工具夹具、信号灯及工艺设备联动。

5. 工业检测与测试平台

• 输出控制信号，实现测试工序自动化。

英文资料：

GIDDINGS&LEWIS M.1300.4145 output module

1、 Product Overview

GIDDINGS&LEWIS M.1300.4145 output module is a signal and control interface unit in industrial automation systems, used to convert logical instructions issued by the controller into executable electrical signals, driving external loads such as relays, contactors, indicator lights, actuators, etc. This module has the characteristics of fast response speed, high reliability, and strong anti-interference ability, and is commonly used in CNC systems, automated production lines, and mechatronics equipment.

2、 Technical parameters (typical indicators, subject to actual version)

Module type: Digital output module

Number of channels: Multi channel (commonly 8 or 16 channels)

Output form: transistor/relay output (depending on configuration)

Voltage level: DC 24V or AC 110/220V compatible

Output current: Single channel 0.5A-2A (typical value)

Isolation method: Optocoupler isolation to enhance anti-interference ability

Response time:<1ms

Installation method: Plug in modular design, easy to replace and expand

Interface: Compatible with GIDDINGS&LEWIS main control system bus

3、 Application scenarios

Numerical Control Machine Tool Control

Control peripheral devices such as spindle start stop, coolant pump, work lights, alarm, etc.

automated production line

Realize the control of conveyor belts, actuator cylinders, and robotic arm end effectors in the production line.

process control system

Used for on-off driving of valves, electromagnets, and motors.

robot system

Control the linkage of end tool fixtures, signal lights, and process equipment.

Industrial Inspection and Testing Platform

Output control signals to achieve automation of testing processes.

2.产      品      展      示      

3.其他产品