ABB 086318-002工业卡件
如果启用了自动引导，则自动引导过程将尝试从扫描列表中指定的设备启动（例如。，FDISK/CDROM/TAPE/HDISK）。（默认）N如果启用了自动引导，则自动引导过程使用要引导的控制器LUN和设备LUN。如果自动引导扫描选项为，则显示引导设备列表启用。如果修改列表，请遵循上面显示的格式（大写）字母，使用正斜杠作为分隔符）。
ABB 086318-002工业卡件自动引导控制器LUN=00？请参阅PPCBug固件包用户手册，以获取目前由PPCBug支持的磁盘/磁带控制器模块。（默认值=$00)自动引导设备LUN=00？请参阅PPCBug固件包用户手册，以获取PPCBug当前支持的磁盘/磁带设备（默认值=$00）自动引导分区号=00？根据PowerPC中的规定，要引导哪个磁盘“分区”参考平台（PRP）规范。如果设置为零，则固件按顺序（1、2、3、4）搜索分区，直到找到第一个“可引导”分区隔断这就是将被引导的分区。其他可接受值为1、2、3或4。在这四种情况下，指定的分区将是无需搜索即可启动。自动启动序列在启动之前延迟的时间（秒）靴子延迟的目的是允许您选择停止使用键启动。时间值为0-255秒。（默认值=7秒）
自动引导默认字符串[空字符串为NULL]=？您可以指定一个字符串（文件名），该字符串将传递给正在处理的代码已启动。此字符串的最大长度为16个字符。（默认值=null字符串）
ROM启动启用[Y/N]=N？ROM仅在通电时启动[是/否]=是？ROM引导启用VMEbus搜索[Y/N]=N？ROM启动中止延迟=5？ROMboot序列在启动之前延迟的时间（秒）靴子延迟的目的是允许您选择停止使用键启动。时间值为0-255秒。（默认值=5秒）
ROM引导直接启动地址=FFF00000？PPCBug搜索ROMboot模块时测试的第一个位置。（默认值=$FFF00000）Y ROMboot功能已启用。N ROMboot功能被禁用。（默认）Y ROMboot仅在通电时尝试。（默认）N在任何重置时尝试ROMboot。Y VMEbus地址空间，除常规区域外的内存，将搜索ROMboot模块。N VMEbus地址空间将不会被访问罗姆布特。（默认）
If Autoboot is enabled, the Autoboot process attempts
to boot from devices specified in the scan list (e.g.,
FDISK/CDROM/TAPE/HDISK). (Default)
N If Autoboot is enabled, the Autoboot process uses the
Controller LUN and Device LUN to boot.The listing of boot devices displayed if the Autoboot Scan option is
enabled. If you modify the list, follow the format shown above (uppercase
letters, using forward slash as separator).
Auto Boot Controller LUN = 00?
Refer to the PPCBug Firmware Package User’s Manual for a listing of
disk/tape controller modules currently supported by PPCBug. (Default =
$00)
Auto Boot Device LUN = 00?
Refer to the PPCBug Firmware Package User’s Manual for a listing of
disk/tape devices currently supported by PPCBug.
(Default = $00)
Auto Boot Partition Number = 00?
Which disk “partition” is to be booted, as specified in the PowerPC
Reference Platform (PRP) specification. If set to zero, the firmware
searches the partitions in order (1, 2, 3, 4) until it finds the first “bootable”
partition. That is then the partition that will be booted. Other acceptable
values are 1, 2, 3, or 4. In these four cases, the partition specified will be
booted without searching.The time in seconds that the Autoboot sequence delays before starting the
boot. The purpose for the delay is to allow you the option of stopping the
boot by use of the <Break> key. The time value is from 0-255 seconds.
(Default = 7 seconds)
Auto Boot Default String [NULL for an empty string] = ?
You may specify a string (filename) which is passed on to the code being
booted. The maximum length of this string is 16 characters. (Default = null
string)
ROM Boot Enable [Y/N] = N?
ROM Boot at power-up only [Y/N] = Y?
ROM Boot Enable search of VMEbus [Y/N] = N?
ROM Boot Abort Delay = 5?
The time in seconds that the ROMboot sequence delays before starting the
boot. The purpose for the delay is to allow you the option of stopping the
boot by use of the <Break> key. The time value is from 0-255 seconds.
(Default = 5 seconds)
ROM Boot Direct Starting Address = FFF00000?
The first location tested when PPCBug searches for a ROMboot module.
(Default = $FFF00000)
Y The ROMboot function is enabled.
N The ROMboot function is disabled. (Default)
Y ROMboot is attempted at power-up only. (Default)
N ROMboot is attempted at any reset.
Y VMEbus address space, in addition to the usual areas
of memory, will be searched for a ROMboot module.
N VMEbus address space will not be accessed by
ROMboot. (Default)
