Magnetek MG2-1F-3FE 电源供应模块 PDF资料
1.产 品 资 料 介 绍:
MAGNETEK MG2-1F-3FE 电源供应模块
一、产品概述
型号:MG2-1F-3FE
类型:模块化交流转直流(AC-DC)开关电源
输入电压范围:100–240V AC,50/60Hz
输出电压:24V DC(典型)
输出电流:13A – 25A(视具体配置)
输出功率:约 300W–600W 范围
冷却方式:自然风冷或强制风冷
应用定位:工业控制与通信设备供电
二、产品特点
宽电压输入
适配全球电源标准,电压波动范围大,可靠性高。
高效率与功率密度
工作效率可达 85%–90%,功率密度高,节省安装空间。
模块化设计
支持热插拔、模块并联,可组成冗余或高功率输出系统。
精准电压输出
输出电压稳定,电压调整率和负载调整率优于 ±1%。
多重保护功能
过压保护
过流保护
短路保护
过温保护
自动恢复功能
诊断与指示接口
模块上通常带有 LED 状态指示
可选输出“正常”状态信号(用于远程监控)
英文资料:
MAGNETEK MG2-1F-3FE power supply module
1、 Product Overview
Model: MG2-1F-3FE
Type: Modular AC to DC Switching Power Supply
Input voltage range: 100-240V AC, 50/60Hz
Output voltage: 24V DC (typical)
Output current: 13A-25A (depending on specific configuration)
Output power: approximately 300W-600W range
Cooling method: natural air cooling or forced air cooling
Application positioning: Power supply for industrial control and communication equipment
2、 Product Features
Wide voltage input
Adapting to global power standards, with a wide range of voltage fluctuations and high reliability.
High efficiency and power density
The work efficiency can reach 85% -90%, with high power density, saving installation space.
Modular design
Supports hot swapping and module parallel connection, can form redundant or high-power output systems.
Accurate voltage output
The output voltage is stable, and the voltage regulation rate and load regulation rate are better than ± 1%.
Multiple protection functions
Overvoltage protection
Overcurrent protection
Short circuit protection
Over Temperature Protection
Automatic recovery function
Diagnostic and indicator interface
Modules usually have LED status indicators
Optional output of 'normal' status signal (for remote monitoring)
2.产 品 展 示
3.其他产品
4.其他英文产品
HE700GEN200 Network Interface Module
ABB UN0503a-P Digital Output Module
2VM61-000-2 | SR1000-000000 | IMDSM05 |
2VM61-000-1 | PSR3-23075-25-202 | 710-658268-20 |
2VM52-020-6 | P325 | 710-612545-004 |
2VM52-000-11 | SV3405-11000 | F31X133PRUAKG1 |
2VM52-000-1 | SS9RMPRR11 | F31X136TBGAAG1 |