Magnetek MG3-1G-1G-PM电源模块 PDF资料
1.产 品 资 料 介 绍：
MAGNETEK MG3-1G-1G-PM 电源模块
产品应用领域
起重机与提升设备供电系统
用于桥式起重机、龙门吊、升降台等电气系统中，为控制单元、驱动器、编码器等低压负载提供稳定直流或交流辅助电源；
支持与矢量控制器协同使用，确保在复杂工作循环中供电不间断。
电梯与自动扶梯控制系统
为主控板、制动单元、安全逻辑模块等关键部件提供辅助供电，保障控制系统正常运行；
模块化设计适应电梯井道狭窄空间的布置要求。
工业自动化控制柜
被广泛集成于PLC控制柜、HMI面板系统、伺服放大器模块中，用作稳压电源或缓冲电源，确保控制信号不受主电源波动干扰；
在多负载并联供电结构中，提供分路稳定供电能力。
再生制动系统能量回馈模块供电
与Magnetek变频器、再生制动单元配套使用，为其内部逻辑或风扇模块提供独立供电，避免主电源掉电影响系统散热或控制响应。
工厂输送与堆垛系统
为传感器网络、信号灯、条码读取器、限位开关等弱电系统提供分布式供电支持，满足长距离输送线的节点供电需求。
港口与船舶起重自动化系统
在港机、集装箱起重设备中，与多轴控制系统共同使用，提供隔离、稳定的DC电压源，适应高振动、高盐雾环境下的供电要求。
应急电源切换辅助模块
与UPS系统或蓄电池组协同，作为自动切换电源路径的控制辅助电源，用于保证突发停电场景下逻辑控制不中断。
英文资料：
MAGNETEK MG3-1G-1G-PM power module
Product application areas
Crane and lifting equipment power supply system
Used in electrical systems such as bridge cranes, gantry cranes, and lifting platforms to provide stable DC or AC auxiliary power for low-voltage loads such as control units, drivers, encoders, etc;
Support collaborative use with vector controllers to ensure uninterrupted power supply in complex work cycles.
Elevator and Escalator Control System
Provide auxiliary power supply for key components such as the main control board, braking unit, and safety logic module to ensure the normal operation of the control system;
Modular design is suitable for the layout requirements of narrow spaces in elevator shafts.
Industrial automation control cabinet
Widely integrated into PLC control cabinets, HMI panel systems, and servo amplifier modules, it is used as a voltage regulator or buffer power supply to ensure that control signals are not affected by fluctuations in the main power supply;
In a multi load parallel power supply structure, it provides stable power supply capability through branching.
Power supply for regenerative braking system energy feedback module
Used in conjunction with Magnetek frequency converters and regenerative braking units, it provides independent power supply for its internal logic or fan modules to avoid affecting system heat dissipation or control response when the main power supply drops.
Factory Conveyor and Stacking System
Provide distributed power supply support for weak current systems such as sensor networks, signal lights, barcode readers, limit switches, etc., to meet the node power supply needs of long-distance conveyor lines.
Port and Ship Crane Automation System
In port machinery and container lifting equipment, it is used together with multi axis control systems to provide isolated and stable DC voltage sources, adapting to power supply requirements in high vibration and high salt spray environments.
Emergency power switching auxiliary module
Collaborating with UPS systems or battery packs, it serves as a control auxiliary power source for automatically switching power paths, ensuring uninterrupted logic control in the event of sudden power outages.
2.产 品 展 示
3.其他产品
4.其他英文产品
GE D20 EME 10BASE-T Digital Control Modu
RADISYS 451558-004 Communication Module
ABB UN0942b-P Programmable Controller
| 6ES5752-0LA12 | CACR-SR20SF1AFB | 60-0292-00 |
| 6ES5752-0AA23 | CACR-JUM25D2A | EPC-9-166MHZ |
| 6ES5750-2AB21 | CACR-TS555Z1SR-Y9 | C2SBM-RSYS-PL2 |
| 6ES5736-6CB00 | CACR-UP20AAA | 459826-002 |
| 6ES5736-2CF00 | CACR-UP6AAC | 002-1-23158-10 |
| 6ES5736-2CB60 | CACR-UP50AAB | D486DX266 |
