KEBA E-ANA-SUB2控制板 PDF资料
1.产 品 资 料 介 绍：
中文资料：
产品概述
KEBA E-ANA-SUB2 控制板 是 KEBA 自动化系统中的一款模拟量信号扩展模块，主要用于采集和处理外部设备的模拟信号（如电压、电流、温度等），实现高精度数据传输与过程控制功能。该模块通常作为子模块（SUB）集成在 KEBA 控制系统（如 KePlast、KeControl）中，适用于塑料机械、机器人、数控设备等自动化场景。
技术参数（参考标准，具体以 KEBA 官方文档为准）
| 项目 | 参数说明 |
|---|---|
| 型号 | E-ANA-SUB2 |
| 模块类型 | 模拟量扩展子模块（Analog Submodule） |
| 模拟输入通道 | 支持多通道模拟输入（如 0-10V、4-20mA） |
| 精度 | 高分辨率 ADC，典型 12 位或以上（视版本而定） |
| 输入隔离 | 通道间及对控制系统隔离（提高抗干扰能力） |
| 通信接口 | 通过背板总线连接至主控制器（如 KeControl C5 系列） |
| 安装方式 | 控制器内部插接式安装（板卡形式） |
| 工作温度范围 | -10°C 至 +60°C（工业标准） |
应用领域
注塑机与塑料成型设备
用于采集模温、水温、油压等过程模拟信号，协助控制器实现精密工艺控制。
广泛集成于 KEBA KePlast 系统中。
工业机器人控制系统
接收外部模拟传感器（如力传感器、距离传感器）信号，实现动态调整或协作安全功能。
机械加工设备（CNC / 自动化生产线）
用于监测电机负载、位置控制器反馈电压、电流监控等功能。
过程控制与工厂自动化系统
用于压力、流量、液位等模拟量数据采集，配合上位机或 PLC 控制系统进行数据处理与报警逻辑。
英文资料：
product overview
The KEBA E-ANA-SUB2 control board is an analog signal expansion module in the KEBA automation system, mainly used to collect and process analog signals from external devices (such as voltage, current, temperature, etc.), achieving high-precision data transmission and process control functions. This module is usually integrated as a submodule (SUB) in KEBA control systems (such as KePlast, KeControl) and is suitable for automation scenarios such as plastic machinery, robots, and CNC equipment.
Technical parameters (reference standards, specific subject to KEBA official documents)
Project parameter description
Model E-ANA-SUB2
Module type Analog submodule
Analog input channels support multi-channel analog inputs (such as 0-10V, 4-20mA)
High precision high-resolution ADC, typically 12 bits or more (depending on version)
Isolation between input isolation channels and isolation of control systems (to improve anti-interference ability)
The communication interface is connected to the main controller (such as KeControl C5 series) through the backplane bus
Installation method: Internal plug-in installation of the controller (board form)
Working temperature range -10 ° C to+60 ° C (industry standard)
application area
Injection molding machines and plastic molding equipment
Used to collect process simulation signals such as mold temperature, water temperature, oil pressure, etc., to assist the controller in achieving precision process control.
Widely integrated into the KEBA KePlast system.
Industrial Robot Control System
Receive signals from external analog sensors (such as force sensors and distance sensors) to achieve dynamic adjustment or collaborative safety functions.
Mechanical processing equipment (CNC/automated production line)
Used for monitoring motor load, position controller feedback voltage, current monitoring and other functions.
Process Control and Factory Automation System
Used for collecting analog data such as pressure, flow rate, liquid level, etc., and cooperating with the upper computer or PLC control system for data processing and alarm logic.
2.产 品 展 示
3.其他产品
Kollmorgen MMC-SD-0.5-230-D伺服驱动器
4.其他英文产品
ABB UN0503a-P Digital Output Module
GESAS CAN-DCM digital amplifier module
GE IS210BPPBH2CAA Printed Circuit Board
| PMA24C-00100-00 | AMAT 0100-20060 | PFEA113-65 3BSE050092R65 |
| PMA240-1150B-02 | AMAT 0100-00127 | PFTL101A-0.5KN 3BSE004166R1 |
| PMA23V-10100-00 | AMAT 0100-00177 | PFEA113 |
| PMA23D-00100-00 | AMAT 0100-35263 | PFTL 201D-100.0KN |
| PMA23C-01100-00 | AMAT 0100-09302 | PFEA113-IP65 3BSE050092R65 |
