KEBA KC-P30-ES2400E2-E00交流充电器 PDF资料
1.产 品 资 料 介 绍：
中文资料：
KEBA KC-P30-ES2400E2-E00 是一款工业级 交流充电器，设计用于电动车辆、工业设备和储能系统的高效充电管理。该充电器具备高能效、安全保护机制及智能控制功能，适用于多种电池类型及充电场景。
技术参数：
输入电压：AC 220V ±10%，单相，50/60 Hz
输出电压：DC 24V ～ 48V（具体电压范围依配置）
输出电流：最大 30A
充电功率：约 720W（依据输出电压与电流变化）
充电模式：恒流/恒压（CC/CV）充电曲线
效率：≥ 90%
保护功能：
过压保护
过流保护
短路保护
过温保护
通信接口：支持 CAN 总线通讯，实现充电状态监控与控制
工作温度：-20°C ～ +50°C
冷却方式：风冷或自然冷却（依据安装环境）
安装方式：面板安装或机柜安装
安全认证：符合 CE、UL 等工业安全标准（具体型号可能略有不同）
应用领域：
1. 电动汽车与电动工具充电
适用于电动叉车、电动扫地车及小型电动车辆的电池充电。
2. 工业储能系统
用于辅助储能设备电池组的维护与充电。
3. 自动化物流设备
为自动导引车（AGV）、自动堆垛机等设备电池供电。
4. 新能源设备
适配风能、太阳能等新能源系统中的电池充电管理。
英文资料：
KEBA KC-P30-ES2400E2-E00 is an industrial grade AC charger designed for efficient charging management of electric vehicles, industrial equipment, and energy storage systems. This charger has high energy efficiency, safety protection mechanism, and intelligent control function, suitable for various battery types and charging scenarios.
Technical parameters:
Input voltage: AC 220V ± 10%, single-phase, 50/60 Hz
Output voltage: DC 24V~48V (specific voltage range depends on configuration)
Output current: maximum 30A
Charging power: about 720W (depending on output voltage and current changes)
Charging mode: Constant current/constant voltage (CC/CV) charging curve
Efficiency: ≥ 90%
Protection function:
Overvoltage protection
Overcurrent protection
Short circuit protection
Over Temperature Protection
Communication interface: Supports CAN bus communication to achieve charging status monitoring and control
Working temperature: -20 ° C to+50 ° C
Cooling method: air cooling or natural cooling (depending on the installation environment)
Installation method: panel installation or cabinet installation
Safety certification: Complies with industrial safety standards such as CE and UL (specific models may vary slightly)
Application areas:
1. Charging of electric vehicles and electric tools
Suitable for battery charging of electric forklifts, electric sweepers, and small electric vehicles.
2. Industrial energy storage system
Used to assist in the maintenance and charging of energy storage device battery packs.
3. Automated logistics equipment
Provide battery power for devices such as Automated Guided Vehicles (AGVs) and automatic stackers.
4. New energy equipment
Adapt to battery charging management in new energy systems such as wind and solar power.
2.产 品 展 示
3.其他产品
4.其他英文产品
RADISYS 61-0158-04 CPU Control Card
ASEA DSQC100 connector backplane
ABB UN0821B-P redundant output module
| PMB32D-00101-03 | 70 BT 01b | 1SAP240100R0001 |
| PMB32D-00101-02 | AMAT 0100-00275 | 3BSE003879R1 BB174 |
| PMB32D-00101-01 | AMAT 0100-00195 | 57160001-AZ DSTD 150 |
| PMB32D-00101-00 | AMAT 129-0201 | P21NSXA-LSS-NS-02 |
| PMB32D-00100-03 | TU831V1 | N34HRFM-LNK-NS-00 |
| PMB32D-00100-02 | 70 SL 01a | 3BSE001449R1 TC520 |
