KEBA T20T-T00-AR0-C示教器 PDF资料
1.产 品 资 料 介 绍：
中文资料：
KEBA T20T-T00-AR0-C 是 KEBA 推出的一款轻量级工业示教器（Teach Pendant），专为机器人系统及自动化设备提供便携式控制和现场操作功能。该设备具有人体工学设计、基础显示与控制功能，适合日常操作、点动控制、状态监控及简易示教等用途。
技术参数：
显示功能：无彩色液晶触摸屏（本型号为基础款）
控制按键：集成方向控制、功能键、确认键等多功能按键
安全功能：配备三段式使能开关与红色急停按钮，符合工业安全标准
通信接口：通过 KEBA 系统专用接口或以太网与控制器通信
供电方式：外部供电，通常由主控系统供电
外壳设计：工业级塑料材质，具备良好抗冲击、防尘能力
电缆长度：标配约 5 米，可定制更长版本
操作环境：0°C 至 +50°C，湿度＜85%，无凝露
适配系统：兼容 KEBA KeMotion、KePlast 等平台控制器
应用领域：
机器人示教与运动控制
点动操作机器人关节，实现动作路径编程与教学。
注塑机及自动化设备现场调试
进行参数输入、启动/停止控制、故障查看与重启操作。
生产线维护与人工干预
人员可快速通过吊坠控制设备执行维护动作或应急处理。
包装、物流等系统状态监控
快速查看运行状态，执行机械手或执行器点检。
系统调试与参数设置
调整系统初始位置、配置基础运行条件等。
英文资料：
KEBA T20T-T00-AR0-C is a lightweight industrial teaching pendant launched by KEBA, designed to provide portable control and on-site operation functions for robot systems and automation equipment. This device has ergonomic design, basic display and control functions, suitable for daily operation, jog control, status monitoring, and simple teaching purposes.
Technical parameters:
Display function: Non color LCD touch screen (this model is the basic model)
Control buttons: integrated direction control, function keys, confirmation keys and other multifunctional buttons
Safety function: equipped with a three-stage enable switch and a red emergency stop button, in compliance with industrial safety standards
Communication interface: Communicate with the controller through KEBA system dedicated interface or Ethernet
Power supply method: External power supply, usually supplied by the main control system
Shell design: made of industrial grade plastic material, with good impact resistance and dust prevention capabilities
Cable length: Standard configuration is about 5 meters, longer versions can be customized
Operating environment: 0 ° C to+50 ° C, humidity<85%, no condensation
Adaptation system: compatible with KEBA KeMotion, KePlast and other platform controllers
Application areas:
Robot Teaching and Motion Control
Jogging the robot joints to achieve action path programming and teaching.
On site debugging of injection molding machines and automation equipment
Perform parameter input, start/stop control, fault detection, and restart operations.
Production line maintenance and manual intervention
Personnel can quickly control the equipment to perform maintenance actions or emergency response through the pendant.
Monitoring the status of packaging, logistics and other systems
Quickly check the operating status and perform mechanical arm or actuator inspections.
System debugging and parameter setting
Adjust the initial position of the system, configure basic operating conditions, etc.
2.产 品 展 示
3.其他产品
4.其他英文产品
RADISYS 061-05927-0031 adapter module
| PMB33E-00101-03 | AMAT 0100-11000 | KT 8991a |
| PMB33E-00101-02 | NICS01 | P22NRXD-LNN-NS-02 |
| PMB33E-00101-01 | IIMKM01 | EHDB130 |
| PMB33E-00101-00 | 07AS82 | N42HCLM-LNK-NS-00 |
| PMB33E-00100-03 | 07BT62R1 | P21NSXC-LNN-NS-02 |
| PMB33E-00100-02 | NTLS01 | P22NRFH-LNN-NS-00 |
| PMB33E-00100-01 | AIN300 | 3BSE003859R1 DSDX 180 |
