FET3251COP1B4COH2流量计,FET3251COP1B4COH2怎么使用
存储大型配置使用CPU 36x的90-30系列PLC最多支持32个DSM314或DSM324模块。当其他智能模块用于PLC，如APM和GBC模块。也可以减少什么时候：PLC中的机架数量增加；逻辑、运动和AUP文件的总大小增加；应用程序使用C逻辑块或C逻辑程序；或连接的编程器或HMI设备用于读取参考内存或故障表。
FET3251COP1B4COH2流量计在某些情况下，可能会增加DSM314或CPU将在硬件配置中接受的DSM324模块先存储逻辑，然后分别存储配置。CPU350和CPU36x不适用支持硬件配置对于CPU31x/32x/33x/34x/374硬件中包含任何CPU35x或CPU36x型号的应用程序配置通常可以存储到任何其他9.00或更高版本的CPU35x或CPU36x模型，然后执行。但是，尝试存储包含CPU31x、32x、33x、34x或374到CPU35x或CPU36x将出现故障。在连接多个编程器的情况下运行时，如果存储操作是当加载操作已经在进行时，由一个程序员启动加载请求将失败。未清除转换表当参考表变明朗。通过清除参考表时，不会清除转换表程序员。
Storing Large Configurations
A Series 90-30 PLC using a CPU 36x supports a maximum of 32 DSM314 or
DSM324 modules. This number is reduced when other intelligent modules are
used in the PLC, such as APM and GBC modules. It may also be reduced
when:
The number of racks in the PLC increases;
The total size of logic, motion and AUP files increases;
The application uses C logic blocks or a C logic program; or
Connected programmers or HMI devices are used to read reference
memory or fault tables.
In some cases it may be possible to increase the number of DSM314 or
DSM324 modules that the CPU will accept in the hardware configuration by
storing logic first and then storing the configuration separately.
CPU350 and CPU36x do not
support hardware configurations
for CPU31x/32x/33x/34x/374
An application that contains any CPU35x or CPU36x model in the hardware
configuration can usually be stored to any other release 9.00 or later CPU35x
or CPU36x model and then executed. However, attempting to store a
hardware configuration that contains a CPU31x, 32x, 33x, 34x or 374 to a
CPU35x or CPU36x will fail.
Simultaneous Load and Store
When operating with multiple programmers attached, if a store operation is
initiated by one programmer, while a load operation is already in progress, the
load request will fail.
Transition Tables are not cleared
when the reference tables are
cleared.
The transition tables are not cleared upon clearing the reference tables through
the programmer.
