3BDE042237R1触摸屏,3BDE042237R1使用配置手册
全局数据是GBC自动重复广播的数据。90-30系列每次总线扫描时，GBC最多可以发送128字节的全局数据。它可以接收多达128字节的全局数据每个总线从其总线上的每个GBC扫描。
发送全局数据一旦通过配置设置，全局数据将自动广播。其他接收Series 90-30 PLC发送的全局数据将其放置在以下内存位置：90-30系列PLC发送全局数据到：其他CPU将全局数据放置在这些内存位置：90-30系列PLC。
3BDE042237R1触摸屏内存类型和开始在配置接收GBC期间选择地址。系列90-30 GCM+%I、%Q、%G、%R、%AI、%AQ与设备编号（16-23）对应的90-30系列PLC/GCM%G内存位置发送数据的90-30 GBC系列。系列六PLC寄存器存储器。期间选择的开始系列六地址发送数据的Series 90-30 GBC的配置。系列5 PLC寄存器存储器。期间选择的开始序列5地址发送数据的Series 90-30 GBC的配置。与设备对应的计算机PCIM或QBIM输入表段发送数据的90-30 GBC系列的编号。接收全局数据GBC可以配置为接收或忽略来自任何其他GBC的全局数据。记忆在配置过程中还选择了传入全局数据的类型和长度。90-30系列CPU可以将传入的全局数据放在%I、%Q、%G、%R、%AI或%AQ内存中。
Genius总线控制器文档
Global Data is data that is automatically and repeatedly broadcast by a GBC. The Series 90-30
GBC can send up to 128 bytes of Global Data each bus scan. It can receive up to 128 bytes of
Global Data each bus scan from each GBC on its bus.
Sending Global Data
Once set up by configuration, Global Data is broadcast automatically. Other devices that receive
the Global Data sent by a Series 90-30 PLC place it in these memory locations:
Series 90-30 PLC Sends
Global Data To: Other CPU Places Global Data in these Memory Location:
Series 90-30 PLC %I, %Q, %G, %R, %AI, %AQ. Memory type and beginning
address are chosen during configuration of the receiving GBC.
Series 90-30 GCM+ %I, %Q, %G, %R, %AI, %AQ
Series 90-30 PLC/GCM %G memory location corresponding to Device Number (16-23)
of the Series 90-30 GBC that sent the data.
Series Six PLC Register memory. Beginning Series Six address selected during
configuration of the Series 90-30 GBC that sent the data.
Series Five PLC Register memory. Beginning Series Five address selected during
configuration of the Series 90-30 GBC that sent the data.
Computer PCIM or QBIM Input Table Segment corresponding to Device
Number of the Series 90-30 GBC that sent the data.
Receiving Global Data
The GBC can be configured to receive or ignore Global Data from any other GBC. The memory
type and length for incoming Global Data are also selected during configuration. The Series 90-30
CPU can place incoming Global Data in %I, %Q, %G, %R, %AI, or %AQ memory.
