3BHE020455R0101控制模块,PPD113使用过程
安全说明
开始任何工作之前，请阅读并遵循本节中给出的安全说明。然而如果更严格，则应以当地法定法规为准。
张力测量系统不包含运动部件。但是，称重传感器安装在卷筒运行的旋转翻滚装置附近。
1.6.1人员安全生产线运行时，切勿使用称重传感器或附近的称重传感器。开始任何工作前，关闭并锁定驱动器的操作开关测量辊部分。
3BHE020455R0101控制模块,PPD113使用过程之前，关闭电源操作开关并将其锁定在张力电子设备上对张力电子设备执行任何工作。工作完成后，检查电线是否松动，所有装置是否正确固定。注意事项所有从事安装工作的人员必须知道主管道的位置测量系统的电源开关及其操作方式。1.6.2设备安全
之前，务必关闭测量系统的电源电压更换装置。小心地处理电子单元，以减少静电放电（ESD）。注意电路板上的警告标签
Safety Instructions
Read and follow the safety instructions given in this section before starting any work. However,
local statutory regulations, if stricter, are to take precedence.
The tension measurement system contains no moving parts. However, the load cells are
mounted close to a rotating roll over which a web is running.
1.6.1 Personnel Safety
WARNING
Never work with the load cells, or nearby, when the production line is in service.
Before starting any work, switch off and lock the operating switch of the drive
section for the measuring roll.
DANGER
Switch off and lock the mains operating switch to the tension electronics before
performing any work on the tension electronics. When the work is completed,
check that there are no loose wires, and that all units are properly secured.
NOTE
All personnel working with the installation must know the location of the main
power supply switch to the measurement system and how it is operated.
1.6.2 Equipment Safety
CAUTION
Always switch off the mains supply voltage to the measurement system before
replacing a unit.
CAUTION
Handle the electronic unit carefully to reduce the risk of damage from
Electric Static Discharge (ESD). Note the warning label on the circuit boards
