3BSE042234R2触摸屏,3BSE042234R2显示屏
安装机箱互连电缆要将最多三个机箱连接在一起（最多30个I/O插槽），请安装连接电源之前，请先连接机箱互连电缆。
安装输入/输出模块并连接电源使用模块的安装说明/用户手册将其安装到机箱。
使用电源的安装说明将其连接到您的机箱。
3BSE042234R2触摸屏危险位置注意事项本设备适用于I类2类A、B、C、D或仅限非危险场所。以下警告声明适用于危险场所。
UL认证的工业控制设备，经美国和加拿大认证
UL认证用于1级2类A、B、C、D组危险场所，认证用于美国和加拿大欧盟89/336/EEC EMC指令，符合
EN 50082-2工业抗扰度
EN 61326，Meas/控制/实验室，工业要求
EN 61000-6-2，工业抗扰度
EN61000-6-4，工业排放
符合：AS/NZS 2064，工业排放!警告爆炸危险
•替换组件可能会影响I类，2类。
•不要更换部件或断开设备除非电源已关闭或已知区域无危险。
•除非通电，否则不要连接或断开组件
已关闭或已知该区域无危险。
•所有接线必须符合N.E.C.第501-4（b）条的规定。
Hazardous Location Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D, or
non-hazardous locations only. The following WARNING statement applies to use in
hazardous locations.
Specifications (continued)
certification
UL Listed Industrial Control Equipment, certified for US and Canada
UL Listed for Class 1 Division 2, Group A, B, C, D Hazardous Locations, certified for
US and Canada
European Union 89/336/EEC EMC Directive, compliant with
EN 50082-2 Industrial Immunity
EN 61326, Meas./Control/Lab., Industrial Requirements
EN 61000-6-2, Industrial Immunity
EN61000-6-4, Industrial Emissions
Australian Rediocommunications Act, compliant with :
AS/NZS 2064, Industrial Emissions
!
WARNING
EXPLOSION HAZARD
•
Substitution of components may impair suitability for
Class I, Division 2.
•
Do not replace components or disconnect equipment
unless power has been switched off or the area is known
to be non-hazardous.
•
Do not connect or disconnect components unless power
has been switched off or the area is known to be
non-hazardous.
•
All wiring must comply with N.E.C. article 501-4(b).
