GJR2390211R45模块卡件,GJR2390211R45用户手册
电磁兼容性（EMC）
欧洲EMC指令89/336/EEC符合：EN 50081-2排放标准
EN 50082-2抗扰度标准EN 61326附录A（工业级）
CISPR 11，工业科学和医学（ISM）射频设备—电磁干扰特性
-限值和测量方法
满足A类限制IEC 61000-4-2 ESD抗扰度触点4 kV，空气8 kV
IEC 61000-4-3辐射场抗扰度
80至1000 MHz时为10 V/m
GJR2390211R45模块卡件IEC 61000-4-4电气快速瞬态/突发抗扰度
2 kV输入/输出、直流电源和通信线
IEC 61000-4-5浪涌抗扰度
交流和直流电源线上的2kV；输入/输出1kV和通信线路
电磁兼容性（续）
GJR2390211R45模块卡件IEC 61000-4-6传导抗扰度射频引起的干扰领域
输入/输出150 kHz至80 MHz时为10 V（rms），直流电源和通信线路
IEC 61000-4-8工频磁性现场抗扰度50和60 Hz时为30 A/m
产品安全性美国保险商实验室（UL）和加拿大
UL/UL-C被列为适用于UL/UL-C列出的I类，A-D组；
第2分部；温度代码T4外壳基于系统。这些模块也是UL
UL-C被列为提供非易燃通信I类A-D组危险电路连接到指定位置时的位置如上所述的I/A Series®处理器模块
在I/A系列DIN导轨安装子系统用户指南（B0400FA）。通信电路也满足中定义的2类要求
使用条件如I/A系列DIN导轨安装子系统用户指南（B0400FA）。
欧洲低压指令73/23/EEC和爆炸性环境（ATEX）指令94/9/ECCENELEC（DEMKO）认证为
CENELEC中使用的EEx nA[nL]IIC T4认证的2区外壳认证为
为2区IIC组非易燃现场电路供电的相关设备，潜在爆炸性环境
连接到指定的I/A系列处理器I/A系列DIN中所述的模块轨道安装子系统用户指南
Regulatory Compliance
ELECTROMAGNETIC COMPATIBILITY (EMC)
European EMC Directive 89/336/EEC
Meets: EN 50081-2 Emission standard
EN 50082-2 Immunity standard
EN 61326 Annex A (Industrial Levels)
CISPR 11, Industrial Scientific and Medical
(ISM) Radio-frequency Equipment -
Electromagnetic Disturbance Characteristics
- Limits and Methods of Measurement
Meets Class A Limits
IEC 61000-4-2 ESD Immunity
Contact 4 kV, air 8 kV
IEC 61000-4-3 Radiated Field Immunity
10 V/m at 80 to 1000 MHz
IEC 61000-4-4 Electrical Fast
Transient/Burst Immunity
2 kV on I/O, dc power and communication
lines
IEC 61000-4-5 Surge Immunity
2kV on ac and dc power lines; 1kV on I/O
and communications lines
ELECTROMAGNETIC COMPATIBILITY (CONT.)
IEC 61000-4-6 Immunity to Conducted
Disturbances Induced by Radio frequency
Fields
10 V (rms) at 150 kHz to 80 MHz on I/O,
dc power and communication lines
IEC 61000-4-8 Power Frequency Magnetic
Field Immunity
30 A/m at 50 and 60 Hz
PRODUCT SAFETY
Underwriters Laboratories (UL) for U.S. and
Canada
UL/UL-C listed as suitable for use in
UL/UL-C listed Class I, Groups A-D;
Division 2; temperature code T4 enclosure
based systems. These modules are also UL
and UL-C listed as associated apparatus for
supplying non-incendive communication
circuits for Class I, Groups A-D hazardous
locations when connected to specified
I/A Series® processor modules as described
in the I/A Series DIN Rail Mounted
Subsystem User’s Guide (B0400FA).
Communications circuits also meet the
requirements for Class 2 as defined in
Article 725 of the National Electrical Code
(NFPA No.70) and Section 16 of the
Canadian Electrical Code (CSA C22.1).
Conditions for use are as specified in the
I/A Series DIN Rail Mounted Subsystem
User’s Guide (B0400FA).
European Low Voltage Directive 73/23/EEC
and Explosive Atmospheres (ATEX) directive
94/9/EC
CENELEC (DEMKO) certified as
EEx nA [nL] IIC T4 for use in CENELEC
certified Zone 2 enclosure certified as
associated apparatus for supplying non
incendive field circuits for Zone 2, Group IIC,
potentially explosive atmospheres when
connected to specified I/A Series processor
modules as described in the I/A Series DIN
Rail Mounted Subsystem User’s Guide
