ABB CMA135 微处理器模块
1.产 品 资 料 介 绍：
中文资料：
ABB的CMA135微处理器模块是一款具有多种特性和功能的模块。以下是一些关于CMA135模块的基本信息：
- 模块类型：CMA135属于控制模块，为处理机和现场传感器、执行器提供接口。
- 规格参数：该模块的输入电压范围为12-48VDC，输出电压范围为5VDC，最大输出电流为10A。其尺寸为170mm x 105mm x 32mm，重量约为120g。工作温度范围为-20°C至+50°C，存储温度范围为-40°C至+70°C。其环境湿度要求为5%至95%相对湿度（无凝露）。
- 处理器：该模块使用32位RISC处理器。
- 系统支持：ABB提供完整的PROFIBUS解决方案，CMA135模块可以作为其中的一部分，与工程软件和现场总线硬件配合使用。系统800xA支持两种不同类型的PROFIBUS，包括DP和PA。DP的传输速率可扩展至12 Mbit/s，针对与远程I/O、驱动器和电机控制等设备的交互进行了优化。PA
英文资料
ABB's CMA135 microprocessor module is a module with multiple features and functions. Here are some basic information about the CMA135 module:
Module type: CMA135 belongs to the control module and provides interfaces for processors, field sensors, and actuators.
Specification parameters: The input voltage range of this module is 12-48VDC, the output voltage range is 5VDC, and the maximum output current is 10A. Its size is 170mm x 105mm x 32mm, and its weight is approximately 120g. The working temperature range is -20 ° C to+50 ° C, and the storage temperature range is -40 ° C to+70 ° C. The environmental humidity requirement is 5% to 95% relative humidity (without condensation).
Processor: This module uses a 32-bit RISC processor.
System support: ABB provides a complete PROFIBUS solution, and the CMA135 module can be used as part of it in conjunction with engineering software and fieldbus hardware. The system 800xA supports two different types of PROFIBUS, including DP and PA. The transmission rate of DP can be extended to 12 Mbit/s, optimized for interaction with remote I/O, drivers, and motor control devices.
2.产 品 展 示
3.产 品 展 示
ABB REG670 1MRK002826-AC 安全系统组件
ABB UFC760BE01 3BHB007030R0001 可编程控制器
ABB 3DDE300417 Input/Output Board
ABB XXD129A01 Card Module Controller
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com