ABB 87TS01K-E GJR2368900R1231数字量输入卡件

1.产    品     资    料    介    绍：

中文资料：

▪ ABB 87TS01K-E GJR2368900R1231 CPU模块可以安装在背板中除扩展插槽之外的任何位置。CPU模块占用2个插槽。

I/O和选件模块可以安装在任何可用的插槽中，但插槽0和扩展插槽除外，插槽0只能接受ABB 87TS01K-E GJR2368900R1231电源。每个I/O插槽都有两个连接器，因此可以在任何I/O插槽中安装基于ABB 87TS01K-E GJR2368900R1231 PCI的模块或串行模块。

最右边的插槽是扩展插槽。它只能用于可选的串行总线变送器模块IC695LRE001。

通用背板端子（TB1）通用背板左端的端子1至6保留用于外部风扇控制（在未来的系统中可用）ABB 87TS01K-E GJR2368900R1231 PCI电源不通过背板提供隔离+24V输出电源。端子7和8可用于连接可选的隔离+24VDC外部电源，这是第4章模块负载要求表中列出的一些IC693和IC694模块所需的。

这些端子可接受14至22 AWG的单根电线。如果需要隔离+24VDC的模块安装在扩展背板中，则不需要外部隔离+24V电源。

英文资料：

▪ An ABB 87TS01K-E GJR2368900R1231 CPU module can be installed anywhere in the backplane except the Expansion slot. CPU modules occupy 2 slots.

I/O and option modules can be installed in any available slot except slot 0, which can only accept IC695 Power Supplies, and the Expansion slot. Each I/O slot has two connectors, so either an ABB 87TS01K-E GJR2368900R1231 PCI-based module or a serial module can be installed in any I/O slot.

The rightmost slot is the expansion slot. It can only be used for optional Serial Bus Transmitter module IC695LRE001.

Universal Backplane Terminals (TB1) Terminals 1 through 6 on the left end of the Universal Backplane are reserved for external fan control (available in future systems) The ABB 87TS01K-E GJR2368900R1231 PCI Power Supplies do not provide Isolated +24V output power over the backplane. Terminals 7 and 8 can be used to connect an optional external source of Isolated +24VDC, which is required for some IC693 and IC694 modules as listed in the table of Module Load Requirements in chapter 4.

These terminals accept individual wires from 14 to 22 AWG. If modules that require Isolated +24VDC are installed in an Expansion Backplane instead, an external Isolated +24V power supply is not required.

2.产      品      展      示      

3.主      营      品      牌      

本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com