B&R 5AP1120.1906-000贝加莱触摸控制器
1.产 品 资 料 介 绍：
中文资料：
5AP1120.1906-000是贝加莱 AP1000 自动化面板型号，SXGA 分辨率为1280 x 1024 像素。其显示类型为TFT 彩色，显示尺寸为19.0”。它配备了一个反应灵敏的模拟电阻式触摸屏，允许用户浏览系统的功能并输入命令。触摸屏的透光率为81%±3%，其校准采用贝加莱触摸控制器。一个自然阳极氧化的铝框架用一个3 毫米的内置垫圈包围着这个自动化面板。它还使用了LED背光可调光亮度介于35 cd/m²和350 cd/m²之间。
5AP1120.1906-000上有一个采用A 型设计的USB 2.0 接口。它具有480Mbit/s的高速传输速率和500mA的最大载流能力。根据 UL 50，面板正面仅适用于 Type 4X 室内使用，而根据 EN 60529 其防护等级为IP 65。此防护等级表示该部件具有防触摸、防尘和不透水性水射流喷雾。另一方面，面板背面的防护等级为 IP 20 ，可防止直径超过12 毫米的固体外部材料进入。带热传感器在其显示屏上，可以避免面板因热过载而损坏。
英文资料：
5AP1120.1906-000 is a Baccarat AP1000 automation panel model with an SXGA resolution of 1280 x 1024 pixels. Its display type is TFT color, and the display size is 19.0 ". It is equipped with a responsive analog resistive touch screen that allows users to browse system functions and enter commands. The light transmittance of the touch screen is 81% ± 3%, and its calibration is carried out using a Bacardi touch controller. A naturally anodized aluminum frame is surrounded by a 3mm built-in gasket around this automation panel. It also uses LED backlight with adjustable brightness between 35 cd/m ² And 350 cd/m ² between.
There is a USB 2.0 interface with an A-type design on 5AP1120.1906-000. It has a high-speed transmission rate of 480Mbit/s and a maximum current carrying capacity of 500mA. According to UL 50, the front of the panel is only suitable for indoor use with Type 4X, while its protection level is IP 65 according to EN 60529. This degree of protection indicates that the part has touch proof, dustproof and impermeable water jet spray. On the other hand, the protection level on the back of the panel is IP 20, which can prevent solid external materials with a diameter exceeding 12 millimeters from entering. Installing a thermal sensor on its display screen can prevent panel damage due to thermal overload.
2.产 品 展 示
3.主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
