ALSTOM N895313512X工控控制卡件
1.产 品 资 料 介 绍：
中文资料：
ALSTOM N895313512X操作STAT LED指示以太网接口在正常操作模式下的状态。如果STAT指示灯熄灭，则一个事件已输入异常日志，可通过Station Manager界面查看。在正常操作期间，ALSTOM N895313512X当没有记录任何事件时，STAT指示灯亮起。在其他状态下，STAT LED熄灭或闪烁，有助于定义模块的操作状态。ALSTOM N895313512X以太网端口指示灯（100 Mb/速度和链接/活动）操作两个以太网端口中的每一个都有两个绿色指示灯，即100和链接。100指示灯表示网络数据速度（10 Mbps或100 Mbps）。如果网络连接为100 Mbps，则此指示灯点亮。LINK指示灯指示网络链路状态和活动。当链路物理连接时，此指示灯亮起，当端口检测到流量时，此LED闪烁。请注意，端口上的流量并不一定意味着以太网接口上存在流量，因为流量可能在交换机的端口之间流动。ALSTOM N895313512X
英文资料：
ALSTOM N895313512X Operation The STAT LED indicates the condition of the Ethernet interface in normal operational mode. If the STAT LED is off, an event has beenALSTOM N895313512X entered into the exception log and is available for viewing via the Station Manager interface. The STAT LED is on during normal operation when no events are logged. In the other states, the STAT LED is either off or blinking and helps define the operational state of the module. Ethernet Port LEDs (100 Mb/Speed and LINK/Activity) OperationALSTOM N895313512XEach of the two Ethernet ports has two green LED indicators, 100 and LINK. The 100 LED indicates the network data speed (10 Mbps or 100 Mbps. This LED is illuminated if the network connection is 100 Mbps. The LINK LED indicates the network link status and activity. This LED is illuminated when the link is physically connected and blinks when traffic is detected at the port. Note that traffic at the port does not necessarily mean that traffic is present at the Ethernet interface, since the traffic may be going between ports of the switch.ALSTOM N895313512X
2.产 品 展 示
3.主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
