ABB V18345-1010521001控制阀门的电动执行器
1.产 品 资 料 介 绍：
ABB V18345-1010521001是一款用于控制阀门的电动执行器，其配置说明如下：
- 电源：AC220V/50Hz
- 输出信号：4-20mA, 0-10VDC, RS485
- 扭矩范围：10Nm-600Nm
- 开度范围：0-90度
- 工作温度：-30℃~+60℃
- 防护等级：IP67
ABB V18345-1010521001电动执行器的使用方法如下：
- 将执行器安装在阀门上，并连接好电源和输出信号线。
- 使用控制器或PLC等设备发送控制信号，使执行器根据信号控制阀门的开度。
- 根据需要调整执行器的扭矩和开度范围，以适应不同的工况。
ABB V18345-1010521001电动执行器的优点包括：
- 可靠性高：采用精密的电动机和齿轮传动系统，能够实现精准的阀门控制，保证系统的可靠性。
- 稳定性好：采用高精度的控制电路和稳定的输出信号，能够保证阀门的平稳运行。
- 节能环保：采用电动驱动，与传统的液压或气动控制相比，具有更低的能耗和更小的环境污染。
- 适用范围广：可适用于各种管道、容器和设备的控制阀门，包括水处理、化工、石油、天然气等领域。
ABB V18345-1010521001 is an electric actuator used to control valves. Its configuration description is as follows:
Power supply: AC220V/50Hz
Output signal: 4-20mA, 0-10VDC, RS485
Torque range: 10Nm - 600Nm
Opening range: 0-90 degrees
Working temperature: - 30 ℃~+60 ℃
Protection grade: IP67
The usage method of ABB V18345-1010521001 electric actuator is as follows:
Install the actuator on the valve and connect the power and output signal lines.
Use devices such as a controller or PLC to send control signals to enable the actuator to control the opening of the valve based on the signal.
Adjust the torque and opening range of the actuator as needed to adapt to different operating conditions.
The advantages of ABB V18345-1010521001 electric actuator include:
High reliability: The use of precision motor and gear transmission systems can achieve accurate valve control, ensuring system reliability.
Good stability: The use of high-precision control circuits and stable output signals can ensure the smooth operation of the valve.
Energy saving and environmental protection: Using electric drive, compared with traditional hydraulic or pneumatic control, it has lower energy consumption and less environmental pollution.
Wide scope of application: It can be applied to control valves of various pipelines, containers, and equipment, including water treatment, chemical engineering, petroleum, natural gas, and other fields.
2. 产 品 展 示
3. 主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
