RELIANCE 803.65.00驱动电路板
1.产 品 详 情 资 料：
RELIANCE 803.65.00必须在RX3i/RSTi EP配置中启用USB端口，才能在CPU和RDSD之间传输数据。兼容的CPU附带启用了RDSD（USB）端口。RDSD加载和存储操作可以包括以下数据：▪ 一个完整的应用程序，包括逻辑和配置、参考表数据以及运动应用程序的凸轮文件。（支持DSM运动应用程序的运动文件和本地逻辑。）配置可以包括基于机架的以太网接口的以太网全局数据和高级用户参数。（尽管RDSD上必须放置一个完整的、未修改的应用程序，但您可以使用options.txt文件将应用程序的选定组件下载到目标CPU。）▪ 当从CPU加载项目时，密码和OEM密钥（如果有）将被加密并写入RDSD。当项目存储到没有密码或OEM密钥的CPU时，这些密码或密钥会复制到CPU。RELIANCE 803.65.00注意：在启用增强安全性的情况下，如果RDSD源控制器具有4级密码保护，并且目标控制器受密码保护，则无论密码是否匹配，RDSD更新都将失败。使用Legacy安全性，当项目存储到具有密码和/或OEM密钥的CPU时，密码必须匹配，否则存储将失败。▪ 故障表在加载到RDSD或从RDSD存储之前和之后写入RDSD。▪ 如果禁用USB端口的硬件配置成功存储到CPU，则在存储操作完成时，故障表将不会写入RDSD。RELIANCE 803.65.00
The USB port must be enabled in the RX3i / RSTi-EP configuration in order to transfer data between the CPU and the RDSD. The compatible CPUs are shipped with the RDSD (USB) port enabled. The RDSD load and store operations can include the following data: ▪ An entire application, including logic and configuration, reference table data, and cam files for Motion applications. (Motion files and local logic for DSM motion applications are supported.) Configuration can include Ethernet Global Data and Advanced User Parameters for the rackbased Ethernet interface. (Although a complete, unmodified application must be placed on the RDSD, you can use an options.txt file to download selected components of the application to the target CPU.) RELIANCE 803.65.00▪ Passwords and OEM key, if any, are encrypted and written to the RDSD when the project is loaded from the CPU. When the project is stored to a CPU that has no passwords or OEM key, those are copied to the CPU. Note: With Enhanced Security enabled, the RDSD update will fail if the RDSD source controller has Level 4 password protection and the destination controller is password protected, regardless of whether the passwords match. With Legacy security, when the project is stored to a CPU that has passwords and/or OEM key, the passwords must match or the store will fail. ▪ Fault tables are written to the RDSD before and after a load to or store from the RDSD. ▪ If a hardware configuration that disables the USB port is successfully stored to the CPU, the fault tables will not be written to the RDSD at completion of the store operation.RELIANCE 803.65.00
2.产 品 展 示
3. 主 营 产 品
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
