HIMA F7131电源模块
1.产 品 详 情 资 料：
检测到F（故障）/红色单元错误。R（un）/绿色运行。数据库总线；Rx/黄色RECEVE LED指示在DriveBus上接收数据帧。数据库总线；Tx/黄色发送LED指示在传动总线上传输数据帧。输入/输出；Rx/黄色RECEVE LED指示在I/O总线上接收数据帧。输入/输出；Tx/黄色发送LED指示在I/O总线上传输数据帧。工具/黄色RECIEVE LED指示接收PC工具总线上的数据帧（1）。（1） 该指示灯在设备前部不可见。通过塑料外壳上的通风孔可以看到。工具/黄色传输LED指示PC工具总线上数据帧的传输（1）。电流消耗（来自CEX总线24 V DC）200 mA最大外部电源电压17 V最小25 V典型30 V最大保护等级IP20，符合EN60529和IEC 529。认证CE标记并符合EMC指令EMCD 2004/108/EC中规定的要求，符合标准EN 50081-2和EN 61000-6-2。
F(ault) /Red Unit error detected. R(un) /Green Operating. Dbus; Rx /Yellow RECIEVE LED indicating reception of data frames on the DriveBus. Dbus; Tx /Yellow TRANSMIT LED indicating transmission of data frames on the DriveBus. I/O; Rx /Yellow RECIEVE LED indicating reception of data frames on the I/O bus. I/O; Tx /Yellow TRANSMIT LED indicating transmission of data frames on the I/O Bus. Tools /Yellow RECIEVE LED indicating reception of data frames on the PC Tool bus(1). (1) This LED is not visible in the front of the unit. It can be seen through the ventilation holes in the plastic housing. Tools /Yellow TRANSMIT LED indicating transmission of data frames on the PC Tool Bus(1).Current consumption (from CEX-Bus 24 V DC) 200 mA max. External supply voltage 17 V minimum 25 V typical 30 V max Protection Rating IP20 according to EN60529, IEC 529. Approval CE-marked and meets the requirements specified in EMC Directive EMCD 2004/108/EC according to the standards EN 50081-2 and EN 61000-6-2.
2.产 品 展 示
3.公 司 优 势 主 营 产 品
4.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
