HIMA F7130A电源模块
1.产 品 介 绍
品牌：HIMA
型号：HIMA F7130A
产品说明：电源模块
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装正品，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
HIMA F7130A电源模块接线图以下接线图显示了I/O扩展系统电缆的接线配置。为点对点电缆和Y形电缆提供了接线图。注意：在远程基板HIMA F7130（及更早版本）和HIMA F7130（及更早）中，有必要移除电缆插入基板的配合电缆的引脚1。这意味着，当使用工厂制造的Y形电缆HIMA F7130时，必须在将引脚1与其中一个基板一起使用之前，将其从插入远程基板的阳端断开。这些底板的定制Y形电缆应使用图10-20制作。有关更多详细信息，请参阅“早期远程底板版本的用户警报”一节。远程底板HIMA F7130及更高版本）和HIMA F7130（及更新版本）在底板内部进行了更改，从而减少了从配套电缆上拆下销1的需要。当将工厂制造的Y形电缆与这些底板一起使用时，无需从电缆上拆下销1。可使用图10-20或图10-21为这些底板定制Y形电缆。图10-21显示了工厂制造的Y形电缆的制造方法
Wiring Diagrams The following wiring diagrams show the wiring configuration for I/O expansion system cables. Wiring diagrams are provided for both point-to-point cables and Wye cables.Note: In remote baseplates, HIMA F7130(and earlier) andHIMA F7130(and earlier), it is necessary to remove pin 1 of the mating cable where the cable plugs into the baseplate. This means that when using a factory made Wye cable,HIMA F7130, you must break pin 1 out of the male end where it plugs into the remote baseplate before using it with one of these baseplates. Custom built Wye cables for these baseplates should be built using Figure 10-20. See the section “Alert to Users of Early Remote Baseplate Versions” for more details.Remote baseplatesHIMA F7130 (and later( andHIMA F7130 (and later) have a change inside the baseplate which alleviates the need to remove pin 1 from the mating cable. When using factory made Wye cable with these baseplates, it is not necessary to remove pin 1 from the cable. Custom built Wye cables for these baseplates can be made using either Figure 10-20 or Figure 10- 21. Figure 10-21 shows how the factory made Wye cable are made.
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
